Back to search

University of Birmingham

The mechanical and tribological properties of PEEK gears

Abstract

dc:description.abstract

This research compares the dynamic performance of injection moulded and laser sintered poly-ether-ether-ketone (PEEK), outlining the potential of laser sintering as a manufacturing method for high performance polymer gears. It was observed that the mechanical properties of laser sintered PEEK was a significant improvement over previous laser-sintered materials, and comparable with high performance injection-moulded materials. In addition, the coefficient of friction and wear rates were significantly below that of injection moulded PEEK. However, for direct application of the laser sintered material EOS PEEK HP3 to power transmission gears, the predominant form of failure was bending fatigue, limiting the material to low power transmission levels. Observation of the fracture surface highlighted limited amounts of plasticity, although regions of intergranular failure and fast fracture could be identified from the failed surface. In addition, the failure stress path, in the region of progressive intergranuar failure, was governed by the partially sintered particle boundaries in the material; showing a similar failure response to flexure testing. In conclusion, despite the limited amount of plasticity shown in the material failure, the tribological properties of laser sintered PEEK mean that their application to power transmission is still desirable.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hoskins, Thomas James

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hoskins, Thomas James. The mechanical and tribological properties of PEEK gears. d_ph thesis, University of Birmingham, 2015.