Back to search

University of Birmingham

Non-destructive characterisation of steel microstructures using electromagnetic sensors

Abstract

dc:description.abstract

Steel properties are controlled by its microstructural parameters, such as grain size, phase balance and precipitates. It is desirable to monitor microstructural changes during processing, allowing in-situ feedback control, or microstructure characterization in a non-contact and non-destructive manner. Electromagnetic (EM) sensors are sensitive to changes in magnetic (relative permeability- dominant effect) and electrical (resistivity­ minor effect) properties, which in steels, vary with microstructure and temperature. EM sensors have been shown to have great potential for assessing steel microstructures (austenite to ferrite transformation or decarburisation). However, the influence of key microstructural parameters is not yet fully understood. This thesis presents a study of the effect of individual microstructural parameters on relative permeability and hence sensor output. In particular the ferrite grain size, pearlite interlamellae spacing, as-quenched martensite carbon content and phase balance were independently studied. The relative permeability of certain steel microstructures was determined using a finite element (FE) model fitted to experimental data. These values agreed with the literature and were used to predict the relative permeability of complex microstructures using an embedded microstructure FE model. Finally a case study on commercial steels was carried out, where the phase balance and tensile strength of dual phase steels were accurately predicted.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zhou, Lei

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Zhou, Lei. Non-destructive characterisation of steel microstructures using electromagnetic sensors. d_ph thesis, University of Birmingham, 2015.