Back to search

University of Birmingham

Understanding shell cracking during de-wax process in investment casting

Abstract

dc:description.abstract

In investment casting, the removal of wax from the shell is a critical step which may cause shell failure. It would be advantageous to predict the stress development during de-waxing process with computer simulation. The process was simulated with the consideration of two aspects: (i) The thermo-physical data required to model the shell and wax behaviour in the autoclave environment and (ii) A simulation capable of capturing the interaction between shell, wax and the autoclave environment. Data on mechanical properties, thermal properties, permeability, rheology, thermal expansion and density was gathered for wax and shell as appropriate. Flow-3D was used to simulate the de-wax process such that the shell and wax can be simultaneously modelled. It was shown that the Von misses stress exceeded the expected critical failure stress at certain nodes after steam was introduced to the system. Waxes with higher viscosity were predicted to reach the critical stress sooner. The simulation showed that for the selected drainage orifice sizes that was no or little difference in the time taken to reach the critical stress. Wax compressibility which was considered to represent shell permeability was predicted to have a large effect on shell cracking prediction. In general, the statistics of failure in validation test limited the conclusions that could be drawn. Waxes predicted to show differences in cracking and drainage with increasing orifice size did so in the experiment. The simulated drainage times were greater than determined experimentally by around 380s and this requires further investigation.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lee, Kevin

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lee, Kevin. Understanding shell cracking during de-wax process in investment casting. d_ph thesis, University of Birmingham, 2016.