Back to search

University of Birmingham

Development of high strength hot rolled strip steel products with bainitic microstructures

Abstract

dc:description.abstract

High strength, low alloy, hot rolled strip steels with yield stresses in the range 700 to 1300MPa are required for the Lifting and Excavating product sector. Improved combination of strength and toughness in these high strength steels is desired, requiring a detailed understanding of the relationship between microstructure and mechanical properties. In this work 12mm thick 700MPa yield stress strip steels with fully bainitic microstructures, with different compositions and/or processing conditions, have been studied. The microstructures of the steels were investigated with both optical microscopy and SEM. Micro-hardness and Charpy impact tests (at different temperatures) were carried out to investigate the mechanical properties, followed up with fracture surface analysis and unit crack path (UCP) analysis. Three types of bainitic microstructures were identified and quantified, including upper bainite, lower bainite and granular bainite. The fracture surface and UCP analysis indicating that granular bainite is detrimental to toughness, but cannot necessarily be avoided in the steels investigated; while the presence of a small amount of lower bainite (above 5%) was found to improve the impact toughness significantly. Continuous cooling transformation (CCT) diagrams for steels with different compositions were produced, which allowed investigation of the phase transformation behaviour and selection of optimum chemical composition/coiling temperature for improved properties. The effects of alloying elements (B, Mo and V) on the transformation behaviour have been confirmed through the experiments. An optimised combination of alloying and coiling temperature has been proposed and validated via investigating plant trial products with similar alloying and processing parameters.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Du, Jinlong

Subjects

dc:subject × 2

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Du, Jinlong. Development of high strength hot rolled strip steel products with bainitic microstructures. d_ph thesis, University of Birmingham, 2017.