Back to search

University of Birmingham

Slipper lubrication in axial piston pumps

Abstract

dc:description.abstract

The performance of hydrostatic type slippers in axial piston pumps has been studied both experimentally and theoretically. The experimental work covers measurements of slipper clearance, slipper pocket pressure and piston spin. These measurements were taken from typical axial piston pumps running under normal operating conditions using a data logging system. The effect of operating conditions was also investigated and the resulting trends are described and discussed. In the theoretical work the behaviour of an idealised slipper was studied under steady state conditions. It was established that a flat slipper of this type does not work on a purely hydrostatic basis. Additional lift can be generated hydrodynamically if the slipper is suitably tilted; however, if the slipper is flat it cannot satisfy moment equilibrium. One mechanism which was found to satisfy load, flow as well as moment equilibrium was the presence of suitable amounts of non-flatness on the slipper loads. A parabolic type of non-flatness was simulated and the relationships between tilt, pocket pressure central clearance and minimum clearance were derived with respect to non-flatness. In conclusion, the theory is applied to the design procedure and a method is presented which enables the optimum non-flatness and minimum clearance to be estimated at particular operating conditions.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
1979

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kakoullis, Yiannis Polly

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kakoullis, Yiannis Polly. Slipper lubrication in axial piston pumps. d_ph thesis, University of Birmingham, 1979.