University of Birmingham
Plastic deformation of Ti-6Al-4V micro-pillars at room temperature
Abstract
dc:description.abstractIn this work, the deformation behaviour of Ti-6Al-4V micro-pillars was studied via compression tests at room temperature. Micro-pillars containing either the single α phase region or both α and β phases were prepared and either prismatic <a> slips or <c+a> slips were activated. Thin foils for TEM study were prepared using the FIB from the selected deformed pillars. STEM was used to image dislocations and their interaction with the α/β interfaces. Sample yield strength has been observed in all groups of micro-pillars and its relationship with the β phase, α/β interface, orientation and extrinsic sample size was discussed. The β phase is proved weaker than the α phase and the α/β interfaces behaviour as both the barriers and sources of dislocations. The magnitude of influence depending on the volume fraction, orientation and morphology of the β phase and the α/β interfaces. The work-hardening rate is related to the orientation of micro-pillars and the α/β interfaces in the micro-pillars. The strain bursts can be suppressed by the α/β interface and smaller sample size. The sample with smaller size expressed the larger strain burst in the stress-strain curves. The orientation influences the number and magnitude of strain bursts.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2017
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Liu, Zhaoran
Subjects
dc:subject × 1Rights
- Language dc:language.dcterms_iso639_2
- eng