Back to search

University of Birmingham

The effect of tempering parameters on the hardness and precipitation characteristics of quenched and tempered RQT701 steel plate.

Abstract

dc:description.abstract

Reheated quenched and tempered 701 steel (RQT701) is a high strength low alloy martensitic grade commonly used in the earth moving and construction industries. The aim of this project was to investigate the tempering response of RQT701 steel at 580, 600 and 620 °C for between 1 and 100 hours. Steel plate, of composition 0.17C, 0.29Cr and 0.53Mo (all wt. %) and 15 mm thickness, was supplied in the as-quenched condition. It was found that the as-quenched condition (water cooled from 925 °C at 60 °C-s, surface measurement) consisted of autotempered martensite with a hardness of 430 HV. Ice water quenching was tested and did not have any effect on the tempering response past 30 minutes. Hardness measurements on samples tempered between 1 and 4 hours showed an increase of approximately 10 HV between 2 and 3 hours. Particle analysis using SEM images revealed the average precipitate equivalent circle diameter to increase from 45 to 71 nm, the number density to decrease from 63 to 52 per μm2, and the volume fraction of precipitates to increase from 0.017 to 0.022 %. The results suggest that the formation of very fine M2C, in combination with cementite, cause the secondary hardening peak.

Degree

thesis:*
Name dc:type.qualificationname
m_sc
Level dc:type.qualificationlevel
m_sc
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Driscoll, Jonathan Richard

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Driscoll, Jonathan Richard. The effect of tempering parameters on the hardness and precipitation characteristics of quenched and tempered RQT701 steel plate.. m_sc thesis, University of Birmingham, 2018.