Back to search

University of Birmingham

Corrosion film solubility and suspended particle behaviour of corroding SS316L surfaces in simulated nuclear plant coolant

Abstract

dc:description.abstract

A once-through flowing rig built entirely from 316L stainless steel (SS316L) was used to study dissolution and particulate release behaviour of corrosion films on SS316L surfaces in simulated PWR primary coolant. Coolant of pH25C 9-11 was prepared using LiOH in nitrogen-sparged ultrapure water, and pumped at 0.1-2 g/min, under ~100 bar pressure and temperatures up to 300 °C. Flow velocity was at most 6.4 mm/s in ¼” tubing, and 0.13 mm/s in 1” bore tubing where the bulk of the volume resided. Levels of the five most prevalent alloying elements – Fe, Cr, Ni, Mo, Mn – were analysed in rig effluent samples using ICP-MS. Nitrocellulose filters (0.05-3.0 μm) were used at the point of sampling to assess the contribution from particulate and colloidal matter. In most runs, SS316L surfaces of the rig acted as the sole source of corrosion products. Levels of Fe, Cr, and Ni were generally in the low ppb range, consistent with solubility, though transients to higher levels occurred. Levels of Mo and Mn varied with time and flow rate, sometimes exceeding 100 ppb, and cumulative release, particularly of Mo, appeared to be greater than could be accounted for by non-selective oxidation, suggesting leaching from the SS316L subsurface.

Degree

thesis:*
Name dc:type.qualificationname
d_ph
Level dc:type.qualificationlevel
d_ph
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hewett, John M.

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hewett, John M.. Corrosion film solubility and suspended particle behaviour of corroding SS316L surfaces in simulated nuclear plant coolant. d_ph thesis, University of Birmingham, 2018.