Back to search

University of Birmingham

The effects of titanium Ti-6Al-4V powders manufactured using electron beam melting (EBM) - additive manufacturing on metallurgical evaluation

Abstract

dc:description.abstract

Multiple methods of manufacturing Ti-6Al-4V powders for Additive Manufacturing (AM) are available. The effects of the powder quality, properties and post-processing conditions on microstructure and mechanical properties in Electron Beam Melting (EBM) process are investigated in this work. Two powders manufactured using Plasma (PA) and Gas (GA) Atomisation were fully characterised. Test specimens were built using default manufacturer’s (Arcam) parameters and mechanically tensile tested in different post-processing conditions: as built (near net-shape), heat treated using Hot Isostatic Pressing (HIP), and on surface machined. Each build specimen was cut and polished to analyse for porosity, defects, and microstructure. The microstructure of as-built samples was found to be of very fine and acicular morphology due to high solidification rate. HIP heat treatment has been observed to homogenise as-built anisotropic grain microstructure, with reduction and elimination of gas pores and defects for as-built EBM samples. However, this (HIP) also resulted in coarser grain microstructure. Both GA and PA specimens yield strength (YS) and ultimate tensile strength (UTS) measured, with PA found to have higher values in comparison to GA. The study found that lack of fusion/un-melted particles caused lower elongation for as-built PA samples due to un-optimised parameters and process instability. Spherical gas pores (argon trapped) in GA powders and parts were predominately found due to atomisation process thus inherited in as-built parts. Nonetheless, all samples had better and some above the minimum ASTM F294-14 titanium tensile requirement. The PA yield strength and tensile strength of the EBM as-built specimens were 850 and 925 MPa irrespectively, while GA yield strength and tensile strengths were 810 and 887 MPa irrespectively.

Degree

thesis:*
Name dc:type.qualificationname
m_sc
Level dc:type.qualificationlevel
m_sc
Grantor dc:publisher.institution
University of Birmingham
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Muzangaza, Emmanuel

Subjects

dc:subject × 1

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Birmingham
Base URL
etheses.bham.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Muzangaza, Emmanuel. The effects of titanium Ti-6Al-4V powders manufactured using electron beam melting (EBM) - additive manufacturing on metallurgical evaluation. m_sc thesis, University of Birmingham, 2018.