University of Birmingham
Binary clusters produced with cluster beam deposition for electrochemistry and heterogeneous catalysis
Abstract
dc:description.abstractThis thesis describes the production, characterisation and catalytic performance of nanoclusters fabricated by cluster beam deposition using the magnetron sputtering, gas condensation technique. MoS2-based clusters and Au-based clusters are demonstrated in electrochemistry (HER) and gas phase heterogeneous catalysis (CO oxidation), respectively. The atomic structure analysis of the clusters was performed with aberration-corrected scanning transmission electron microscope with high angle annular dark field (HAADF-STEM). Size-controlled (MoS2)300 clusters deposited on amorphous carbon present an incomplete multi-layer structure with the absence of extended crystalline order. Such a layered structure was also found in Ni-MoS2 hybrid clusters [with a mass corresponding to (MoS2)1000] produced by dual target magnetron sputtering. Compared with MoS2 clusters, a significant enhancement in HER activity by Ni-MoS2 hybrid clusters was found. However, both MoS2 clusters (Mo:S = 1:0.9) and Ni-MoS2 clusters (Mo:S = 1:1.8) present a sulphur-deficient composition. In order to overcome the sulphur deficiency of the MoS2 clusters, a sulphur-enrichment technique based on a combination of sulphur addition (by sublimation) and annealing inside the cluster beam vacuum chamber was performed on size-selected (MoS2)1000 clusters. This process led to a notable increase in extended crystallinity and a moderate increase in size (from 5.5 nm to 6.0 nm in diameter). Compared with Ni-MoS2 clusters, the sulphur-enriched MoS2 clusters show even more enhancement on the HER activities with more than 30-fold increases in exchange current densities. We have demonstrated a method of inhibiting the sintering of Au clusters in Au-based catalysis by exploring the stabilisation of supported Au clusters against sintering by alloying with Ti. Size-selected Au2057 (405, 229 amu) clusters and similar mass Au/Ti nanoalloy clusters (400, 000 amu) were produced by cluster beam deposition onto thin silica films. A strong anchoring effect was found in the case of Au/Ti clusters by HAADF-STEM experiments, consistent with DFT calculations by collaborators. Different sintering mechanisms were revealed between Au cluster dimers and Au/Ti cluster dimers. Preliminary CO oxidation measurements on Au and Au/Ti clusters indicates that Au/Ti clusters are promising as catalysts. Au/Ti clusters show catalytic activity on CO oxidation while Au clusters are non-active due to the serious sintering and the support effect.
Degree
thesis:*- Name dc:type.qualificationname
- d_ph
- Level dc:type.qualificationlevel
- d_ph
- Grantor dc:publisher.institution
- University of Birmingham
- Year dc:date.issued
- 2019
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Niu, Yubiao
Subjects
dc:subject × 1Rights
- Language dc:language.dcterms_iso639_2
- eng
Identifiers
dc:identifier.*- Dc Identifier Grantnumber
- CATSENSE