Back to search

Boston University

Novel process for recycling magnesium alloy employing refining and solid oxide membrane electrolysis

Abstract

dc:description.abstract

Magnesium is the least dense engineering metal, with an excellent stiffness-to-weight ratio. Magnesium recycling is important for both economic and environmental reasons. This project demonstrates feasibility of a new environmentally friendly process for recycling partially oxidized magnesium scrap to produce very pure magnesium at low cost. It combines refining and solid oxide membrane (SOM) based oxide electrolysis in the same reactor. Magnesium and its oxide are dissolved in a molten flux. This is followed by argon-assisted evaporation of dissolved magnesium, which is subsequently condensed in a separate condenser. The molten flux acts as a selective medium for magnesium dissolution, but not aluminum or iron, and therefore the magnesium collected has high purity. Potentiodynamic scans are performed to monitor the magnesium content change in the scrap as well as in solution in the flux. The SOM electrolysis is employed in the refining system to enable electrolysis of the magnesium oxide dissolved in the flux from the partially oxidized scrap. During the SOM electrolysis, oxygen anions are transported out of the flux through a yttria stabilized zirconia membrane to a liquid silver anode where they are oxidized. Simultaneously, magnesium cations are transported through the flux to a steel cathode where they are reduced. The combination of refining and SOM electrolysis yields close to 100% removal of magnesium metal from partially oxidized magnesium scrap. The magnesium recovered has a purity of 99.6w%. To produce pure oxygen it is critical to develop an inert anode current collector for use with the non-consumable liquid silver anode. In this work, an innovative inert anode current collector is successfully developed and used in SOM electrolysis experiments. The current collector employs a sintered strontium-doped lanthanum manganite (La0.8Sr0.2Mn03-δ or LSM) bar, an Inconel alloy 601 rod, and a liquid silver contact in between. SOM electrolysis experiments with the new LSM-Inconel current collector are carried out and performance comparable to the state-of-the-art SOM electrolysis for Mg production employing the non-inert anode has been demonstrated. In both refining and SOM electrolysis, magnesium solubility in the flux plays an important role. High magnesium solubility in the flux facilitates refining. On the other hand, lower magnesium solubility benefits the SOM electrolysis. The dissolution of magnesium imparts electronic conductivity to the flux. The effects of the electronic conductivity of the flux on the SOM electrolysis performance are examined in detail through experiments and modeling. Methods for mitigating the negative attributes of the electronic conductivity during SOM electrolysis are presented.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Science and Engineering
Grantor dc:publisher
Boston University
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Guan, Xiaofei

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/2144/11005

Chain of custody

source
Harvested from
Boston University
Base URL
open.bu.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Guan, Xiaofei. Novel process for recycling magnesium alloy employing refining and solid oxide membrane electrolysis. doctoral thesis, Boston University, 2013. https://hdl.handle.net/2144/11005