Back to search

Boston University

Cavitation detection and characterization for small scale nozzles and fuel injectors

Abstract

dc:description.abstract

Cavitation occurs when the liquid pressure drops below a critical threshold causing rapid bubble growth and violent collapse. The presence of cavitation inside fuel injector nozzles has been linked not only to damage associated with cavity collapse near the walls but has been found to enhanced fuel spray atomization. Proper fuel atomization increases engine performance while reducing fuel emissions. The majority of laboratory experimental studies found in the literature are highly reliant on optical access to the working fuel, requiring transparent material, specific geometry, and relatively slow flows to enable even minimally time-resolved optical images with ex-pensive high-speed cameras. While such studies are appropriate for gaining intuition into the types and spatial locations of cavitation phenomena possible in nozzle flows at high Re, there is a need for techniques which can not only be reliably employed at idealized laboratory conditions, but also can be deployed to study real steel fuel injectors while also yielding quantitative information. The objective of this work is to develop alternative non-intrusive acoustic and vibration methods to experimentally study cavitation phenomena in fuel injectors. First, a study was conducted utilizing a combination of optical and acoustic techniques to determine onset and activity of cavitation in small scaled nozzles. Experiments are conducted with acrylic nozzles of various geometry. Unfocused single element transducers are used for acoustic sensing, while digital imaging is used for optical study. Cavitation onset thresholds and development are studied as functions of flow rate and nozzle geometry. Substantial agreement between optical and acoustic methods was observed for both onset and development regimes of cavitation in nozzles. A second study was conducted utilizing laser Doppler vibrometry to measure the vibration response of a commercial fuel injector. An attempt was made to use injector flexural oscillations to determine the void fraction for different fuel injector conditions. Experiments were performed at the Oak Ridge National Laboratory on a commercial grade field injector using cyclopentane fuel with varying injection pressure and fuel temperature as control parameters. Frequency shift and mode shape are measured and correlated with cavitation-inducing control parameters. Analysis suggests that observed frequency shifts may allow inference of dynamic void fraction during cavitation in nozzles.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
Boston University
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Do, Huy Khang
Advisor dc:contributor.advisor
  • Holt, Ray G.

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/2144/30741

Chain of custody

source
Harvested from
Boston University
Base URL
open.bu.edu/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Do, Huy Khang. Cavitation detection and characterization for small scale nozzles and fuel injectors. masters thesis, Boston University, 2018. https://hdl.handle.net/2144/30741