Back to search

Boston University

Design of a 10GHz RF power amplifier in 130nm CMOS technology based on Wilkinson combiner methodology

Abstract

dc:description.abstract

There is a growing demand today to design and fabricate RF power amplifiers at high frequencies above 5GHz that can directly drive a 50Ω antenna with sufficiently high transmission power to meet the needs of various wireless communication applications. This has typically been done by using GaN or other III-V technologies to build the power amplifier transistor, in order to allow for the use of much higher power supply voltages, than are used in today’s silicon technologies. For example, a 5W GaN power amplifier at 5GHz would typically make use of a VDD of 5V to 10V, and would be done as a discrete device on a separate module from the RF analog circuitry built out of silicon. With the continuing evolution of Moore’s Law, silicon technologies in use today for high frequency wireless communications typically are using VDD of 1.5V or less. There is a desire, however, in many wireless applications to be able to place the RF power amplifier on the same silicon chip as all the other RF/analog IC circuitry, in order to save chip fabrication cost. Consequently, research in improved methods of RF power amplifier design in silicon technology is being done in many IC design laboratories in order to increase the RF power output of power amplifiers built in silicon. This MS Thesis proposes the complete design of a four channel RF power amplifier by using the Wilkinson combiner with 27dBm output power. All the circuits are designed and implemented based on the Global Foundries 130nm SiGe BiCMOS technology and design kit at a frequency of 10GHz with a VDD = 1.5V, to provide 0.5W of RF output signal power into a 50Ω antenna.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Electrical & Computer Engineering
Grantor
Boston University
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zhao, Shanshan
Advisor dc:contributor.advisor
  • Knepper, Ronald W.

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/2144/36046

Chain of custody

source
Harvested from
Boston University
Base URL
open.bu.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zhao, Shanshan. Design of a 10GHz RF power amplifier in 130nm CMOS technology based on Wilkinson combiner methodology. masters thesis, Boston University, 2019. https://hdl.handle.net/2144/36046