Back to search

Boston University

Mechanical and optical properties of machinable and pressable glass ceramic

Abstract

dc:description.abstract

OBJECTIVES: To investigate the effect of various finishing procedures and repeated firings on color stability and translucency of different ceramics. Also, to examine the mechanical properties after finishing procedures. MATERIALS & METHODS: Four glass-ceramics were investigated; IPS e.max CAD, IPS e.max Press, Celtra Duo, and Celtra Press. For each material 87 disc-shaped specimens, 2 mm in thickness and 12 mm in diameter were fabricated. Specimens were divided into 3 groups (n=29) as no treatment, polishing, and glazing group. Five samples from each group were submitted to 1, 3, and 5 simulated “stain” firings using a ceramic furnace according to the manufacturer’s instructions. Color coordinates were recorded in the CIE L*a*b* system using an X-rite Ci7600 spectrophotometer and Vita EasyShade. Color differences relative to the control and translucency by contrast ratio were recorded. The 3-point flexural strength test was performed using an Instron universal testing machine. Hardness test was performed using Vickers microhardness and surface roughness was measured using a contact profilometer. Data were analyzed using multiple ANOVA (α=0.05). RESULTS: In general, glazed materials showed higher flexural strength than polished and no treatment groups. Celtra Duo showed the highest mean Vickers hardness followed by e.max CAD, e.max Press then Celtra Press. Surface roughness is lowered significantly when the glaze was applied to all materials. The contrast ratio of Celtra Duo is significantly lower than e.max CAD, e.max Press, and Celtra Press. Firing cycles displayed a significant effect in lowering the translucency of e.max CAD, and in raising the translucency of Celtra Duo and Celtra press, but no significant effect on Emax press. Surface treatment showed a non-significant effect on contrast ratio in all materials tested. Repeated firing cycles significantly affected color change for all materials tested, except for Celtra Duo. Also, polishing and glazing significantly affected color change for all tested materials. CONCLUSION: Type of material, surface treatments and firing cycles have a significant effect on color change and translucency. Surface treatment have a significant effect on the mechanical properties of glass ceramics; glazing can improve the flexural strength and reduce surface roughness of the ceramic materials.

Degree

thesis:*
Name thesis:degree_name
Doctor of Science (D.Sc.)
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Prosthodontics
Grantor
Boston University
Year dc:date.issued
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bukhari, Asmaa Faisal
Advisor dc:contributor.advisor
  • Giordano, Russell

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/2144/41348

Chain of custody

source
Harvested from
Boston University
Base URL
open.bu.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bukhari, Asmaa Faisal. Mechanical and optical properties of machinable and pressable glass ceramic. doctoral thesis, Boston University, 2020. https://hdl.handle.net/2144/41348