Back to search

Boston University

RF-US thermoacoustic neuromodulation: a modeling effort

Abstract

dc:description.abstract

In recent decades, ultrasound has been investigated for neural modulation due to its potential to provide high spatial resolution and low invasiveness. However, transcranial application of ultrasound remains a challenge due to the high acoustic impedance of the skull relative to the underlying neural tissue. This effect limits spatial resolution since high frequencies are attenuated and reflected within bone, allowing only low frequencies to effectively couple into neural tissue. To overcome these limitations, a thermoacoustic approach is considered in which RF is used to transmit signal past the skull and better couple high frequency ultrasound to the brain. Ultrasound signal could potentially be superimposed and steered within the brain through the use of a phased array of RF antennas placed outside the skull. To investigate this effect, this thesis presents the development of a 2D finite difference code that incorporates varying RF input parameters to simulate ultrasound initial pressure, velocity, and attenuation through layered phantom and human tissues. In particular, the simulator accounts for RF absorption and fluence within different materials due to varying antenna specifications, including peak power, pulse width, antenna gain, and aperture size. Results of various simulations are discussed, suggesting that increasing the number of antennas in the RF array allows for increased focusing and higher intensity of signal at a distance from the source than can be achieved by one antenna alone. Safety considerations are modeled to determine if adequate ultrasound intensity of 0.3-0.8 MPa can be provided through the thermoacoustic effect to modulate neural activity, while remaining below IEEE safety exposure guidelines of 20 mJ/cm2. Further investigation of more complex array configurations is required to determine if energy density can be spread over a large enough area to lower exposure risk, while providing clinically relevant pressures and frequencies for the purpose of neural modulation. Finally, the finite difference code is used to verify results from a preliminary thermoacoustic array design using omnidirectional antennas that was performed at MIT Lincoln Laboratory. It was found that antennas with larger gain will provide more efficient conversion of RF to ultrasound.

Degree

thesis:*
Name thesis:degree_name
Master of Science
Level thesis:degree_level
masters
Discipline thesis:degree_discipline
Electrical & Computer Engineering
Grantor
Boston University
Year dc:date.issued
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Laher, Rebecca
Advisor dc:contributor.advisor
  • Boas, David A.
ORCID dc:identifier.orcid

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/2144/41936

Chain of custody

source
Harvested from
Boston University
Base URL
open.bu.edu/oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
related terms
citation

Laher, Rebecca. RF-US thermoacoustic neuromodulation: a modeling effort. masters thesis, Boston University, 2021. https://hdl.handle.net/2144/41936