Back to search

Boston University

Stress-resilient electromagnetically actuated deformable mirror

Abstract

dc:description.abstract

Deformable mirrors (DMs) are needed in optical systems for compensation of aberrations using a control technique known as adaptive optics (AO). DMs are generally comprised of a mirror face sheet supported by an array of underlying actuators that can shape the face sheet with nanometer-scale precision. A challenge in fabrication of such devices is that the adhesive assembly process that is generally used to attach surface-normal actuators to the face sheet results in undesirable stress and strain, leading to uncorrectable deformation of the face sheet. The work described in this dissertation presents an innovative mechanical design that effectively solves that problem. The dissertation details design, fabrication, assembly, and control of an electromagnetically actuated DM comprised of a bulk-micromachined single crystal silicon face sheet, an array of single crystal silicon posts that are integrally attached to the face sheet, and an electromagnetic actuation system. Actuation is achieved using an array of fixed permanent magnets adhesively attached to the distal ends of the posts, which are attracted to or repelled by an array of fixed electromagnetic coils, each of which can be independently controlled. An analysis of the stress-reducing mechanical design for DM assembly is described, along with simulations and experimental results. The approach entails a direct application of St. Venant’s Principle to transform the complex and elevated stress state at the adhesion interface between magnet and post to a smaller and simpler and stress state at the face sheet, resulting in more than an order of magnitude reduction in stress-induced deformation. Two electro-magnetic actuation approaches were explored. The first uses a surface micromachined and then electroplated planar copper coil array, while the second uses an array of three-dimensional coils made from precision wound copper wire, assembled in an aluminum housing. Multiple DMs based on these designs were produced in a design and assembly process that precisely attached magnets to posts, aligned that subassembly with the actuator array, and controlled the gap between the magnets and the actuation coils. An electronic driver circuit was developed to control the actuator array using a commercial DM driver and a custom designed voltage-to-current amplifier array. Measurements of static and dynamic performance of the DM in response to actuation were made using a partitioned aperture wavefront (PAW) surface mapping microscope and a high bandwidth single point fiber-optical displacement probe. The prototype DMs had 19 actuators spaced 1.5 mm apart, supporting a 12 mm diameter, 10 µm thick face sheet. Actuation of up to +/-10 µm was achieved and dynamic performance was evaluated. This new DM design and shows promise in applications of optical aberration correction and high-power laser beamforming.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Science & Engineering
Grantor
Boston University
Year dc:date.issued
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Man, Wenkuan
Advisor dc:contributor.advisor
  • Bifano, Thomas G.
ORCID dc:identifier.orcid

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/2144/48866

Chain of custody

source
Harvested from
Boston University
Base URL
open.bu.edu/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Man, Wenkuan. Stress-resilient electromagnetically actuated deformable mirror. doctoral thesis, Boston University, 2024. https://hdl.handle.net/2144/48866