Back to search

Graduate Studies

Secondary Batteries Using a Zinc Negative Electrode

Abstract

dc:description.abstract

Redox flow batteries are considered the most viable option for energy storage among various electrochemical technologies used for electrochemical energy storage. The use of aqueous zinc-based flow batteries offers numerous advantages, such as being environmentally friendly, and constructed from low-cost materials that are abundant and inherently safe. These batteries also have the potential for high theoretical energy density. Alkaline fuel cells / zinc-air batteries face a major hurdle in commercialization due to the degradation of the cathode, which limits their cycle life. In this study, to investigate the durability and degradation of an alkaline air cathode, a novel combination of in-situ and post-mortem analyses was employed. This included modifying the thickness and ratio of carbon/binder in the active layer, as well as monitoring the electrode potential and electrochemical impedance spectroscopy via in-situ analysis. The increased potential loss was found to be caused by the flooding of electrolyte within the primary macro structure of the active layer, leading to an increased mass transfer resistance for oxygen transport. The capability to achieve high power density and prolonged cycle life in zinc-based batteries is hindered by the formation of dendrites on the anode. To address this issue, a new cell design featuring a narrow gap between the electrode and membrane was implemented in a zinc-iodide flow battery. In this novel design, a portion of the electrolyte flows over the electrode surface, and a fraction of the flow passes through the porous felt electrode in the direction of current flow. The power density achieved with the novel flow mode ranks among the highest reported for the zinc-iodide battery. In order to attain high power density and energy density at high current densities, the study employed an electrocatalyst on the positive electrode of the zinc-iodide flow battery, while a perforated copper foil with excellent electrical conductivity was utilized on the negative side. In-situ and ex-situ characterization techniques, including atomic force microscopy coupled with optical microscopy and x-ray diffraction, were employed to elucidate the relationship between the morphology of zinc deposition on the perforated copper foil and battery performance under two different flow field conditions.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Discipline thesis:degree_discipline
Engineering – Chemical & Petroleum
Grantor dc:publisher.institution
Graduate Studies
Year dc:date.issued
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • ShakeriHosseinabad, Fatemeh
Advisor dc:contributor.advisor
  • Dr. Edward Roberts, Dr. Nader Mahinpey
Committee member dc:contributor.committeemember
  • Dr. Kunal Karan, Dr. Sathish Ponnurangam, Dr. Wendy Huang, and Dr. Douglas G Ivey

Subjects

dc:subject × 13

Rights

dc:rights
Statement dc:rights
  • University of Calgary graduate students retain copyright ownership and moral rights for their thesis. You may use this material in any way that is permitted by the Copyright Act or through licensing that has been assigned to the document. For uses that are not allowable under copyright legislation or licensing, you are required to seek permission.
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Citation
ShakeriHosseinabad, F. (2023). Secondary batteries using a zinc negative electrode (Doctoral thesis, University of Calgary, Calgary, Canada). Retrieved from https://prism.ucalgary.ca.

Chain of custody

source
Harvested from
University of Calgary
Base URL
ucalgary.scholaris.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

ShakeriHosseinabad, Fatemeh. Secondary Batteries Using a Zinc Negative Electrode. Graduate Studies, 2023. http://hdl.handle.net/1880/116159