Back to search

Cal Poly

Studies to Characterize Heavy Metal Content and Migration from Recycled PolyethyleneTerephthalate

Abstract

dc:description.abstract

Packaging Materials account for 31% of the world’s municipal solid waste. Agencies like the Environmental Protection Agency (EPA) and the Agency for Toxic Substances and Disease Registry (ATSDR) are pushing for the increased use of recycled thermoplastic materials. Polyethylene terephthalate (PET) is a commonly recycled thermoplastic which is used to package ready-to-eat fruits and vegetables. Most recycled polyethylene terephthalate (RPET) packaging materials contain heavy metal catalysts, the most common being antimony. The recent increased use of recycled plastic materials has been suspected as the source of increased human heavy metal exposure. In this study, cadmium, chromium, nickel, lead and antimony were quantified in post-consumer RPET rigid containers and films using inductively coupled plasma-atomic emission spectrometry (ICP-AES). Two hundred samples were tested of which 29 were found to be contaminated with heavy metals in the parts-per-million (ppm) range. Chromium was found in all the contaminated sample replicates at an average level of 8.18 ppm. Cadmium was found in all the contaminated samples as well. Lead was found in 90.4% of the contaminated samples and concentrations ranged from a low of 0.02 ppm to a high of 0.36 ppm. Nickel was found in 96.4% of the contaminated samples while antimony was found in 97.6% of the samples. Due to limited sample material, 22 of the 29 contaminated RPET rigid containers and films were tested for heavy metal migration into a 5% citric acid:water solution (w/v) or deionized water. Samples were subjected to prolonged storage at 7.2 or 22.2°C for 1, 7 or 14 days, or were exposed for 5 minutes to microwaves from a 1700-watt microwave oven set to 70% power before analysis. Leachate values were at ppb levels but were often below the ICP-AES Limits of Detection which were at also the ppb level, whether calculated for deionized water or 5% citric acid in water. No measureable levels of heavy metal were detected for any sample exposed to water, regardless of treatment. For samples exposed to 5% citrate and stored or microwaved, only chromium and nickel leached at measurable levels, and the number of RPET’s releasing measurable chromium and nickel increased with microwaving compared to the same plastics stored at 22.2 or 7.2°C. Since leaching was calculated as µg/L of heavy metal lost from the entire inner surface (1021 cm2) of a retail salad bag, actual exposure to heavy metal would be much less than measured in this study as retail fruit and vegetable packages and microwaveable pouches usually contain very little liquid in order to increase food safety. The results therefore suggest the potential for little migration of heavy metal from recycled PET to whole or fresh-cut fruits and vegetables when held at ambient or refrigerated temperatures, or when microwaved.

Degree

thesis:*
Name thesis:degree_name
MS in Agriculture - Crop Science
Discipline thesis:degree_discipline
Horticulture and Crop Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Whitt, Michael John-Ross
Contributors dc:contributor
  • Wyatt Brown

Subjects

dc:subject × 9

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Cal Poly
Base URL
digitalcommons.calpoly.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Whitt, Michael John-Ross. Studies to Characterize Heavy Metal Content and Migration from Recycled PolyethyleneTerephthalate. https://digitalcommons.calpoly.edu/theses/1350