Cal Poly
Development and Lab Calibration of the Pnuematic In-Situ Soil Caving Index Sampler (PISCIS)
Abstract
dc:description.abstractThe caving/sloughing of sandy layers into drilled shafts is a common and costly phenomenon in the drilling industry. A prototype soil-testing device known as the Pneumatic In-situ Soil Caving Index Sampler (PISCIS) has been developed to test sandy layers above the water table for their propensity to cave/slough into a drilled shaft during the drilling process. The PISCIS fits down a Cone Penetration Test (CPT) hole and uses air pressure to agitate a sample off of the hole wall that is then collected and weighed. Large-scale lab testing was conducted using sand under a variety of simulated overburden pressures and fines contents. The tests were conducted with a dual purpose in mind. First, the tests confirmed the functionality of the PISCIS prototype and its ability to collect samples in a consistent and repeatable manner. Second, the tests resulted in a calibration curve that shows a very strong (nearly exponential) relationship between collected sample weight and the fines content of the test sand; higher fines contents resulted in lower collection weights. The PISCIS was designed to supplement information found in a geotechnical report with information that would specifically inform drilling contractors about potential caving/sloughing hazards found in the stratigraphy.
Degree
thesis:*- Name thesis:degree_name
- MS in Civil and Environmental Engineering
- Discipline thesis:degree_discipline
- Civil and Environmental Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Grolle, Michael A
- Contributors dc:contributor
-
- Robb Moss
Subjects
dc:subject × 7Identifiers
dc:identifier.*- Identifier
- 10.15368/theses.2015.24