Back to search

Cal Poly

Low-Cost Reaction Wheel Design for CubeSat Applications

Abstract

dc:description.abstract

As science instruments on CubeSats become more sensitive to the attitude of the spacecraft, better methods must be employed to provide the accuracy needed to complete the planned mission. While systems that provide the accuracy required are available commercially, these solutions are not cost-effective, do not allow the design to be tailored to a specific mission, and most importantly, do not give students hand-on experience with attitude control actuators. This thesis documents the design, modeling, and simulation of a low-cost, student-fabricated, reaction wheel system for use in 3U CubeSat satellites. The entire design process for the development of this reaction wheel is based on fundamental design principles and can be replicated for either larger or smaller spacecraft as needed. Additionally, plans for bringing this design up to a prototyping and testing phase are outlined for continued use of this design in the Cal Poly CubeSat Laboratory.

Degree

thesis:*
Name thesis:degree_name
MS in Mechanical Engineering
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bonafede, Nicholas J, Jr.
Contributors dc:contributor
  • William R. Murray
  • Mechanical Engineering
  • College of Engineering

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Cal Poly
Base URL
digitalcommons.calpoly.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Bonafede, Nicholas J, Jr.. Low-Cost Reaction Wheel Design for CubeSat Applications. https://digitalcommons.calpoly.edu/theses/2558