Back to search

Cal Poly

Minimizing Leakage in Thin Walled Structures Printed Through Selective Laser Melting

Abstract

dc:description.abstract

In this project, the scan strategy of selective laser melting (SLM) for thin walled structures was investigated by changing laser parameters and tool path. Producing thin walled structures is difficult due to defects such as warpage and porosity. A layer on the SLM 125 consists of hatch volume, fill contours, and borders, however, for thin walls, hatch volume can become unavailable, resulting in a solely border/fill contour laser tool path. Three central composite designs (CCD) were created to optimize the laser parameters of borders to minimize leakage rate and porosity. The two factors changed were border laser power and scanning speed. The center points of the CCDs were 0.24 J/mm, 0.20 J/mm, and 0.16 J/mm, respectively. This border linear energy density value was calculated by (border laser power / border scanning speed). A machined aluminum fixture was designed and assembled with pneumatics to perform a pressure drop leakage test. Additionally, micrographs of 500μm and 200μm wall thicknesses were analyzed to study between and within layers as well as melt pool dimensions. In the 200μm thick samples, there was delamination and insufficient overlap in border only prints. For border only prints, a lower border linear energy density is recommended, similar to Cal Poly’s hatch volume optimized parameters of 0.15 J/mm.

Degree

thesis:*
Name thesis:degree_name
MS in Industrial Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yap, Andrew Spencer
Contributors dc:contributor
  • Xuan Wang
  • Industrial and Manufacturing Engineering
  • College of Engineering

Subjects

dc:subject × 8

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Cal Poly
Base URL
digitalcommons.calpoly.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Yap, Andrew Spencer. Minimizing Leakage in Thin Walled Structures Printed Through Selective Laser Melting. https://digitalcommons.calpoly.edu/theses/2418