Back to search

Cal Poly

Development Of Load Measurement Technique For Arbitrary Shapes

Abstract

dc:description.abstract

Obtaining aerodynamic forces and moments about all three orthogonal axes for arbitrary shapes at arbitrary orientations in a fast manner via a measurement technique specific to Cal Poly’s low-speed wind tunnel to continually obtain the forces and moments under quasi-steady conditions is explored. A Continuous Rotation Technique (CR) uses a 6-DOF load cell and stepper motor to rotate an object about an axis for a complete rotation. The forces and moments acting upon the object pass through the stepper motor and interface plates and recorded by the load cell as the object is rotated continuously a finite number of rotations. An optical encoder installation tracks the progress of a rotation serving indicator between the subsequent rotations to determine starting angles and body slippage. Average loading of measurements at each timestep along the average time for rotation is found. This dataset along the average time is placed in 1-degree bins and averaged to a final dataset of load measurements at 0.5-degree intervals for a complete 360-degree load map. Testing of this technique is performed on aspect ratio 1 circular cylinder and for a sphere. These test cases are representative of the 3D flow features that are prevalent for bodies of finite aspect ratios. The airloads on these canonical shapes were used to calibrate the measurement technique deriving similarity with prior work performed at Georgia Tech's wind tunnel. This thesis showcases the repeatability of the results in a different and smaller wind tunnel with improved certainty on angle measurements. The scope of the thesis tackles the showcase of an initial proof of concept for the incorporation of such a novel measurement technique using Cal Poly resources.

Degree

thesis:*
Name thesis:degree_name
MS in Aerospace Engineering
Discipline thesis:degree_discipline
Aerospace Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cockrell, Quintin J
Contributors dc:contributor
  • Nandeesh Hiremath
  • Aerospace Engineering
  • College of Engineering

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.calpoly.edu/theses/2707

Chain of custody

source
Harvested from
Cal Poly
Base URL
digitalcommons.calpoly.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Cockrell, Quintin J. Development Of Load Measurement Technique For Arbitrary Shapes. https://digitalcommons.calpoly.edu/theses/2707