Back to search

Cal Poly

A Study on Quantization and Hardware Cost Tradeoffs in a 5G NR LDPC Decoder on FPGA

Abstract

dc:description.abstract

The fixed-point implementation of a 5G New Radio LDPC decoder forces a tradeoff between precision and hardware cost, governed by the variable node word length WL, the check node message width WR, and the normalized min-sum correction factor α. This thesis characterizes how these three parameters affect both error correction performance and FPGA resource utilization for an LDPC decoder on an established LDPC decoder architecture. A bit-accurate MATLAB core model records bit error rate (BER) and frame error rate (FER) while a verified HDL Coder model generates synthesizable VHDL for Vivado synthesis, and both are swept over WL, WR, and α at lifting sizes Z = 64 and Z = 384. The results show that α is effectively free in hardware cost, while WL costs far more per bit than WR, because WL largely dominates the decoder’s critical path and memory units. For configurations that reach the 5 × 10-5 BER target, the SNR required to reach the target varies by approximately 0.05 dB, so hardware cost dominates parameter selection and points to a smallest passing operating point of WL = 6 and WR = 5.

Degree

thesis:*
Name thesis:degree_name
MS in Electrical Engineering
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Acosta, Giancarlo
Contributors dc:contributor
  • Andrew Danowitz
  • Electrical Engineering
  • College of Engineering

Subjects

dc:subject × 8

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.calpoly.edu/theses/3335

Chain of custody

source
Harvested from
Cal Poly
Base URL
digitalcommons.calpoly.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Acosta, Giancarlo. A Study on Quantization and Hardware Cost Tradeoffs in a 5G NR LDPC Decoder on FPGA. https://digitalcommons.calpoly.edu/theses/3335