Back to search

Cal Poly

Analysis and Design of a 2-bit Millimeter-Wave Reconfigurable Intelligent Surface and Investigation of FSS-Assisted Angular Stability

Abstract

dc:description.abstract

Millimeter-Wave (mm-wave) technology utilizes high frequency spectrum and can deliver multi-gigabit speeds, ultra-low latency, and massive bandwidth capacity. However, this technology is rather new and many technical challenges remain. On the other hand, Reconfigurable Intelligent Surfaces (RIS) have emerged as promising structures for controllable electromagnetic wavefront manipulation in wireless communication systems. This thesis presents the design of a 2-bit RIS unit-cell element operating throughout the 30–34 GHz mm-wave band, where the structure was progressively refined from an initial resonating geometry toward a grounded reflective RIS configuration. The proposed structure utilizes PIN-diode switching states to produce four discrete reflected phase states with approximately 90◦ phase separation between adjacent states, collectively approaching full 360◦ reflected phase coverage required for programmable reflected wavefront manipulation. The proposed RIS element shows a reflection loss of better than 0.5 dB across the band, while the reflected phase states exhibit less than 6◦ phase error at the 32 GHz design frequency. Oblique angle studies showed that the reflected phase shift varies between 10◦ to 30◦ as the incident wave direction changes from 0◦ to 30◦. This is due to the strongly resonant behavior required for RIS operation which introduces increased sensitivity to oblique excitation conditions. As a potential solution to improve angular stability, a multilayer Frequency Selective Surface (FSS) superstrate synthesized through coupled interdigital capacitive and inductive strip layers was also studied. The proposed FSS demonstrated superior performance in reducing sensitivity to oblique angles up to 45◦ as a stand-alone surface. The integrated cascaded RIS-FSS configuration was subsequently investigated under oblique excitation conditions, where electromagnetic coupling effects were observed to alter the reflected phase response of the multi- state RIS operation following integration. These observations show that neighboring resonant electromagnetic surfaces cannot be cascaded independently without careful consideration of the coupling interactions introduced following integration.

Degree

thesis:*
Name thesis:degree_name
MS in Electrical Engineering
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Spalek, Max
Contributors dc:contributor
  • Payam Nayeri
  • Electrical Engineering
  • College of Engineering

Subjects

dc:subject × 10

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.calpoly.edu/theses/3359

Chain of custody

source
Harvested from
Cal Poly
Base URL
digitalcommons.calpoly.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Spalek, Max. Analysis and Design of a 2-bit Millimeter-Wave Reconfigurable Intelligent Surface and Investigation of FSS-Assisted Angular Stability. https://digitalcommons.calpoly.edu/theses/3359