Back to search

Carleton University

Predicting weld hardness

Abstract

dc:description.abstract

A comparative study of the methods of predicting the heat-affected-zone (HAZ) hardness is presented in this thesis. There are some five methods suggested by researchers for this purpose --- the Jominy-end-quench method proposed by Doan and Stout [1], a weld-test method suggested by these same authors [2], a mathematical model proposed by Bastien et al [3,4,5], and two similar mathematical models contributed by Arata et al [6].A "Welding Hardness Diagram " is proposed for the Jominy and weld-test methods to simplify the task of predicting hardnesses. Computer programs have been generated for the mathematical models to eliminate the necessity of time consuming calculator computations.Hardnesses predicted by all five methods are compared to measured values from the author's experiment, experimental values from the work of Graville [7] and experimental values from the work of Doan and Stout [1]. It is found that Vickers hardnesses measured with a 500 g load are on average 45 points (VPN) higher than those measured with a 10 kg load. The weld-itest method and the Arata α model provide the most accurate predictions where the load is 10 kg, while the Arata β and Bastien methods show less accuracy in predicting 10kg load hardness results. While the Jominy - end-quench method results (Vickers — 10kg) are seemingly acceptable, basic experimental difficulties and uncertainties suggest that this technique has limited applicability.A discussion of the relative merits of the prediction methods is included. Because the predicted hardnesses based on the Bastien method differed considerably from the experimental results (Vickers --- 10 kg), a sensitivity analysis was carried out to help rationalize the differences.

Degree

thesis:*
Name thesis:degree_name
Master of Engineering (M.Eng.)
Level thesis:degree_level
Master's
Discipline thesis:degree_discipline
Engineering, Mechanical
Grantor dc:publisher
Carleton University
Year dc:date.issued
1982

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chong, Lan-Meng

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • Copyright © 1982 the author(s). Theses may be used for non-commercial research, educational, or related academic purposes only. Such uses include personal study, research, scholarship, and teaching. Theses may only be shared by linking to Carleton University Institutional Repository and no part may be used without proper attribution to the author. No part may be used for commercial purposes directly or indirectly via a for-profit platform; no adaptation or derivative works are permitted without consent from the copyright owner.
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Carleton University
Base URL
carleton.scholaris.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chong, Lan-Meng. Predicting weld hardness. Master's thesis, Carleton University, 1982. https://hdl.handle.net/20.500.14718/29680