Back to search

Carleton University

Modelling and optimizing through-the-Earth radio transmissions

Abstract

dc:description.abstract

Through-the-Earth (TTE) radio has been proposed for emergency communications in locations inaccessible by conventional means, such as underground mines. While the technology is viable, it is unclear how the signal propagates in inhomogeneous media; neither modelling or obtaining a conductivity distribution in the context of TTE radio has been previously attempted. With a robust model, many practical questions can be answered, such as what is the maximum range or the optimal frequency to use, or where the transmitter and receiver should be ideally placed. To this end, a finite-difference time-domain (FDTD) code was developed and optimized for the forward modelling of TTE radio transmissions. This method is computationally intensive, and to improve performance, it was run on a graphics processing unit (GPU). The code was validated against analytical solutions for simple geometries.The use of a TTE radio signal to estimate the conductivity structure of an operating environment was demonstrated at an experimental coal mine. A transmitter was set up on the surface, and the signal strength in the underground mine was measured at several locations and frequencies. A four-layer conductivity model, with topography, was fitted to this data, using the FDTD code.TTE radio signal range has been experimentally observed to increase in the presence of elongated conductors. A thin-wire approximation was added to the FDTD code, and conductivity models were fitted to match observed data for propagation along elevator shafts in multistory buildings and along railway tracks. Multistory buildings present a separate challenge due to their conductive reinforced concrete structure. By representing the floors and walls as thin sheets of a given conductance, observed and modelled data were reconciled for a variety of buildings, including above-ground reinforced concrete constructions, a building with steel floors, and a building partially below ground, and for placements of the transmitter and receiver inside or outside the building.Further work remains in modelling a wider variety of settings where TTE radio could be used, such as buildings with different materials. Another avenue of research is to improve the performance of the modelling code, by refining the numerical method used.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Doctoral
Discipline thesis:degree_discipline
Earth Sciences
Grantor dc:publisher
Carleton University
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ralchenko, Maxim

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • Copyright © 2017 the author(s). Theses may be used for non-commercial research, educational, or related academic purposes only. Such uses include personal study, research, scholarship, and teaching. Theses may only be shared by linking to Carleton University Institutional Repository and no part may be used without proper attribution to the author. No part may be used for commercial purposes directly or indirectly via a for-profit platform; no adaptation or derivative works are permitted without consent from the copyright owner.
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Carleton University
Base URL
carleton.scholaris.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ralchenko, Maxim. Modelling and optimizing through-the-Earth radio transmissions. Doctoral thesis, Carleton University, 2017. https://hdl.handle.net/20.500.14718/39088