Back to search

Carleton University

Wide-Band Frequency Synthesizer Design with Compensation for Temperature Variations and Power Supply Noise

Abstract

dc:description.abstract

This thesis discusses the performance improvement frequency synthesizers, which are commonly used circuits found in many electronic systems with the focus on alleviating the detrimental effects that temperature drifts or supply voltage changes can have. Either could require the oscillator to switch frequency bands to maintain lock, which would result in cycle slipping and phase offsets. A solution is described, involving the modification of capacitor bank switching circuits to incorporate a sub-threshold switching to allow frequency band changes to occur slowly enough for the synthesizer feedback loop to track, thus preventing cycle slipping and phase offsets. This is demonstrated with a 0.009 to 1.4 GHz frequency synthesizer implemented in a 0.18 μm SiGe BiCMOS process and achieves 365 fs integrated jitter at 1.05 GHz with a total power consumption of 81 mW. Measurements of the band switching circuit shows it prevents cycle slipping during band switching and reduces the maximum frequency deviation by 99.3%. Measurements were conducted while changing the temperature and supply voltage, and a control voltage monitoring band switching circuit is shown which would be able to correctly switch bands as needed. The combination of these two allows a frequency synthesizer which has become resistant to transient phase effects resulting from temperature or supply voltage variations. Following this demonstration of the core slow switching concept, further circuit enhancements were developed, including the development of a programmable bias line, allowing for controllable rise/fall times of the band switching circuit and for compensation of process, voltage, and temperature variations through calibration. The rise and fall time of the slow switching circuit can be further increased by modulating the control signal with a pulse width modulated control signal. Finally, the susceptibility of the oscillator to power supply noise is also reduced through a change in resonator circuitry, eliminating a contributor of power supply noise up-conversion in complementary cross-coupled pair oscillators.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Doctoral
Discipline thesis:degree_discipline
Engineering, Electrical and Computer
Grantor dc:publisher
Carleton University
Year dc:date.issued
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lam, Jerry Yee-Tung

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • Copyright © 2016 the author(s). Theses may be used for non-commercial research, educational, or related academic purposes only. Such uses include personal study, research, scholarship, and teaching. Theses may only be shared by linking to Carleton University Institutional Repository and no part may be used without proper attribution to the author. No part may be used for commercial purposes directly or indirectly via a for-profit platform; no adaptation or derivative works are permitted without consent from the copyright owner.
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Carleton University
Base URL
carleton.scholaris.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lam, Jerry Yee-Tung. Wide-Band Frequency Synthesizer Design with Compensation for Temperature Variations and Power Supply Noise. Doctoral thesis, Carleton University, 2016. https://hdl.handle.net/20.500.14718/39893