Back to search

Carleton University

Combustion Characteristics of n-heptane Through Temperature Variation Measurements Using Ignition Quality Tester

Abstract

dc:description.abstract

The constant volume combustion apparatus, known as the Ignition Quality Tester (IQTTM), is increasingly used around the world to measure the ignition delay (ID) of compression ignited fuels, and to calculate the derived cetane number (DCN) from correlations developed with the cetane number (CN). The IQTTM is widely used in research due to its capability to manipulate combustion controller parameters, including pressure, temperature, oxygen content and mass of injected fuel. Recently, the IQTTM has also been used to conduct experiments on fuels with a longer I D, such as gasoline. Most findings from previous research are based on instantaneous global pressure measurements to obtain ignition delay, whereas there are minimal spatial and temporal temperature measurements inside the combustion chamber of the IQTTM. This study will expand knowledge of combustion processes through temperature measurements, using a set of fine gauge thermocouples distributed at different locations inside the IQTTM combustion chamber. In this study, the temperature was recorded at 46 locations inside the IQT chamber during fuel injection and combustion. The experiments were performed at the lab of Advanced Engine Technology Ltd. - Ottawa. Two sets of experiments were conducted: injection fuel into nitrogen (no chemical reaction or combustion), and injection fuel into air (chemical reaction or combustion) an the range of ambient air temperatures and pressures was 530 − 590 o C and 10−21.4 bar, respectively. The temperature variations indicated that the biggest drop in temperature was at the chamber centerline, where most of the larger droplets of the fuel spray moved to. A drop was also found to a lesser degree in the region around centerline, while there was no temperature drop near the chamber wall or tail, which means spray did not reach there. A method developed to estimate the physical and total ignition delay based on the temperature measurements is introduced in this study. The combustion initiation lo- cation was predicted from the results of the ignition delay, and it was determined that during long periods of ID the fuel-air mixture becomes pseudo-homogeneous and ....

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Doctoral
Discipline thesis:degree_discipline
Engineering, Mechanical
Grantor dc:publisher
Carleton University
Year dc:date.issued
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hmood, Osama Basil

Subjects

dc:subject × 3

Rights

dc:rights
Statement dc:rights
  • Copyright © 2020 the author(s). Theses may be used for non-commercial research, educational, or related academic purposes only. Such uses include personal study, research, scholarship, and teaching. Theses may only be shared by linking to Carleton University Institutional Repository and no part may be used without proper attribution to the author. No part may be used for commercial purposes directly or indirectly via a for-profit platform; no adaptation or derivative works are permitted without consent from the copyright owner.
Language dc:language.iso
en

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Carleton University
Base URL
carleton.scholaris.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Hmood, Osama Basil. Combustion Characteristics of n-heptane Through Temperature Variation Measurements Using Ignition Quality Tester. Doctoral thesis, Carleton University, 2020. https://hdl.handle.net/20.500.14718/40698