Carleton University
Modelling and Experimental Evaluation of a Sand-Based Seasonal Storage System
Abstract
dc:description.abstractIn 2016, space heating (SH) and domestic hot water (DHW) heating for Canadian residential buildings accounted for 11% of Canada's total greenhouse gas (GHG) emissions. To drastically decrease the GHG emissions from the residential sector, solar thermal energy can be used to fulfill the SH and DHW needs of residential buildings. A major challenge for solar energy use in Canada is the timing mismatch between the solar radiation received and the SH needs of homes. A seasonal thermal energy store bridges this gap by storing thermal energy and discharging it when the demand arises. Sand can be used as the medium in thermal energy storage, but no research has yet been published demonstrating the feasibility or efficiency of a sand-based seasonal thermal energy store (SSTES) for a residential building. A full-scale research house with a solar combisystem and an SSTES has been built in Ottawa, Canada, to evaluate this novel technology. This thesis documents and analyzes a year-long experiment that was performed at the research house to assess whether the solar combisystem and SSTES can fulfill over 90% of the house’s annual SH and DHW heating needs with solar energy. It also presents the development of a 3D, conduction-only numerical model of the heat transfer in and around the SSTES that is validated with the data from the year-long experiment. Validated numerical models allow various design scenarios to be tested and optimized with less time and economic investment. The experimental results show that solar energy fulfilled 70% of the house’s annual SH and DHW heating loads (i.e. solar fraction=70%). The principal reason for the lower-than-expected solar fraction was the SSTES’s high rate of heat loss (twice the expected rate). Its storage efficiency (i.e. heat extraction/heat injection) was only 20%. Analysis of the experimental data shows one side of the SSTES loses heat faster than the other sides. It is hypothesized that the SSTES’s insulation has become partially degraded; the numerical model was modified to reflect this. The final model has been validated through comparison to the experimental data using several key metrics that are presented and analyzed in this work.
Degree
thesis:*- Name thesis:degree_name
- Doctor of Philosophy (Ph.D.)
- Level thesis:degree_level
- Doctoral
- Discipline thesis:degree_discipline
- Engineering, Mechanical
- Grantor dc:publisher
- Carleton University
- Year dc:date.issued
- 2023
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Pinto, Rebecca Ingrid
Subjects
dc:subject × 2Rights
dc:rights- Statement dc:rights
-
- Copyright © 2023 the author(s). Theses may be used for non-commercial research, educational, or related academic purposes only. Such uses include personal study, distribution to students, research and scholarship. Theses may only be shared by linking to the Carleton University Institutional Repository and no part may be copied without proper attribution to the author; no part may be used for commercial purposes directly or indirectly via a for-profit platform; no adaptation or derivative works are permitted without consent from the copyright owner.
- Language dc:language.iso
- en