Back to search

Clemson University

Improved Thermoelectric Performance of P-type Polycrystalline Bi2Te3 via Hydrothermal Treatment with Alkali Metal Salts

Abstract

dc:description.abstract

The field of thermoelectric research has attracted a lot of interest in hope of helping address the energy crisis. In recent years, low-dimensional thermoelectric materials have been found promising and thus become a popular school of thought. However, the high complexity and cost for fabricating low-dimensional materials give rise to the attempt to further improve conventional bulk polycrystalline materials. Polycrystals are featured by numerous grain boundaries that can scatter heat-carrying phonons to significantly reduce the thermal conductivity κ whereas at the same time can unfortunately deteriorate the electrical resistivity ρ. Aiming at the dualism of the grain boundaries in determining the transport properties of polycrystalline materials, a novel concept of 'grain boundary engineering' has been proposed in order to have a thermoelectrically favorable grain boundary. In this dissertation, a polycrystalline p-type Bi2Te3 system has been intensively investigated in light of such a concept that was realized through a hydrothermal nano-coating treatment technique. P-type Bi0.4Sb1.6Te3 powder was hydrothermally treated with alkali metal salt XBH4 (X = Na, K or Rb) solution. After the treatment, there formed an alkali-metal-containing surface layer of nanometers thick on the p-Bi2Te3 grains. The Na-treatment, leaving the Seebeck coefficient α almost untouched, lowered κ the most while the Rb-treatment at the same time increased α slightly and decreased ρ the most. Compared to the untreated sample, Na- and Rb-treatments improved the dimensionless figure of merit ZT by ~ 30% due to the reduced κ and ~ 38% owing to the improved the power factor PF, respectively. The grain boundary phase provides a new avenue by which one can potentially decouple the otherwise inter-related α, ρ and κ within one thermoelectric material. The morphologic investigation showed this surface layer lacked crystallinity, if any, and was possibly an amorphous phase. Once Na- and Rb-treatments with various molar ratios were applied to the same sample, a similar grain boundary layer formed with a compositional gradient along the depth direction. The Hall effect measurements showed that the grain boundary phase introduced new carriers into the system and thereby compensated the loss in mobility. With α almost untouched, the &rho to κ ratio has been optimized by varying the Na:Rb ratio in the starting solution. As a result, the Na:Rb = 1:2 ratio yielded the best ZTvalue of ~ 0.92 at 350K, comparable with that of the state-of-the-art p-Bi2Te3 commercial ingot. Besides ZT, the hydrothermal treatment lessened the temperature dependence of compatibility factor S of as-treated polycrystalline samples, helping a thermoelectric device have overall better performance even if it did not work under its optimal condition.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Physics

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Su, Zhe
Contributors dc:contributor
  • Tritt, Terry M
  • Tritt , Terry M
  • Manson , Joseph R
  • Daw , Murray S
  • Drymiotis , Fivos R

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_dissertations/420

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Su, Zhe. Improved Thermoelectric Performance of P-type Polycrystalline Bi2Te3 via Hydrothermal Treatment with Alkali Metal Salts. Dissertation thesis, https://open.clemson.edu/all_dissertations/420