Back to search

Clemson University

ESTIMATING AND MITIGATING RADIATED EMISSIONS FROM PCB HEATSINKS

Abstract

dc:description.abstract

The advance of VLSI technology requires heatsinks to take away the heat generated by ICs and keep the temperature below an acceptable limit. These metal heatsinks radiate and cause EMI problems when electromagnetic noises are coupled to them. Thus it is important to study the possible radiation of a VLSI heatsink and the effective methods to reduce the radiated emissions. This dissertation includes three chapters on estimating and mitigating VLSI heatsink radiation. In the first chapter, a closed-form expression is derived for determining the maximum possible radiated emissions from a heatsink over a printed circuit board or chassis plane as a function of the maximum voltage between the heatsink and plane. The relevant parameters are the dimensions of the heatsink. The closed-form expression is validated by comparing its results to full-wave simulation results. This analysis was done for rectangular heatsinks, but the results can be applied to other heatsink shapes. The second chapter discusses a method to damp the unintended radiated emissions from PCB-chassis (or heatsink-PCB) resonances with lossy posts mounted near the four corners of the rectangular cavity formed. A simple closed-form expression was derived for determining an optimal series resistance for damping these cavity resonances over a wide range of frequencies. A similar analysis could be done to determine the optimal resistance values for other cavity shapes and mounting post locations. For the 4-post configuration, shorting one or more of the posts does not affect the optimum resistance value for the remaining posts. The third chapter discusses the reduction of a tall heatsink radiation by using shorting posts that bypass some of the noise current to the PCB ground. At high frequencies, the size of a tall heatsink may be comparable to a quarter-wavelength and the heatsink/board geometry can be an efficient antenna. The effectiveness of shorting posts was examined for reducing heatsink radiation. The use of lossy components for damping LC resonances is also discussed.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • He, Xinbo
Contributors dc:contributor
  • Hubing, Todd H
  • Butler , Chalmers M
  • Xu , Xiao-Bang
  • Hung , Stephen

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_dissertations/699

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

He, Xinbo. ESTIMATING AND MITIGATING RADIATED EMISSIONS FROM PCB HEATSINKS. Dissertation thesis, https://open.clemson.edu/all_dissertations/699