Back to search

Clemson University

Micro-Cantilever Based Fiber Optic Hydrophone

Abstract

dc:description.abstract

Endoscopic photoacoustic imaging probe is becoming increasingly important for many clinical photoacoustic imaging applications in which the target tissue can only be accessed by introducing an endoscopic probe percutaneously or through a natural orifice. Miniature fiber optic hydrophone (FOH) has become an attractive choice for endoscopic photoacoustic imaging application. Fiber optic hydrophone has many proven advantages, including small size, light weight, immunity to electromagnetic interference, low cost for single-use application and capability of integration of excitation light source and acoustic wave receiver. This dissertation demonstrates an open cavity, micro-cantilever based fiber optic Fabry-Perot interferometer (FPI) hydrophone. A fused silica micro-cantilever beam as the sensing element is directly fabricated by femtosecond (fs) laser micromachining system. The theoretical analyses and experimental verifications were all applied for evaluation of the proposed cantilever based FOH. A rectangular micro-cantilever based FOH is presented, which has a narrow bandwidth but high response and high sensitivity around its resonant frequency, and has many advantages as a good potential candidate for endoscopic photoacoustic imaging application. As a key parameter of the hydrophone, the resonant frequency can be adjusted by changing the dimensions and shapes of the micro-cantilever. In order to increase the resonant frequency of the rectangular micro-cantilever based FOH, and without loss in sensitivity, V-shaped and triangular cantilever based FOHs are investigated and compared with the rectangular cantilever based FOH theoretically and experimentally. The resonant frequency of the triangular cantilever based FOH has been doubled without loss in sensitivity compared with the rectangular cantilever based FOH. Cantilever based 45° angled FOH was proposed for a new choice for sideway looking detection except forward looking detection for endoscopic imaging in vessels. It consists of a fiber with a 45° angled endface and an fs laser fabricated micro-cantilever. The 45° angled endface would steer the optical axis by 90° via total internal reflection, and send the input light to the sensing part. This configuration could be applied for cross-axial sensing application. The proposed FOHs were all theoretically analyzed and experimental tested. Experimental results agree well with the simulated frequency responses of the proposed FOHs.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Electrical and Computer Engineering (Holcomb Dept. of)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Liu, Jie
Contributors dc:contributor
  • Hai Xiao, Committee Chair
  • Lin Zhu
  • John Ballato
  • Pingshan Wang

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_dissertations/2401

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Liu, Jie. Micro-Cantilever Based Fiber Optic Hydrophone. Dissertation thesis, https://open.clemson.edu/all_dissertations/2401