Back to search

Clemson University

Cure Dependent Viscoelastic-Plastic Modeling of Adhesives to Capture CTE Effects in Multi-Material Structures

Abstract

dc:description.abstract

The effects of Coefficient of Thermal Expansion (CTE) mismatch in multi-material adhesive joints, induced during the manufacturing process, are expected to hinder the peak performance of the adhesive in the service life of the vehicle. With a goal to study and capture these effects, several innovative experimental techniques were performed to record and quantify the manufacturing process induced effects on an adhesive bonded multi-material joint. The tests to capture the effects of curing process on the structure were run at coupon level using a single lap shear geometry and at component level on a scaled-down automotive roof component. The other set of tests were done to determine the effect of manufacturing induced residual stresses on the performance of the adhesive joint. This work proposes a novel approach and a package of material models to model the properties of automotive adhesives during the heat curing process. The proposed material model package consists of a curing kinetics model, a cure and temperature dependent viscoelastic mechanical model and a temperature and rate dependent plastic model. The developed material models were coded into a user-defined material subroutine for LS-DYNA. The material card was used to run finite element simulations and was validated at coupon level and component level. The calibrated material models were fed into a finite element simulation and the prediction results were compared to the experiments on a single lap shear joint and on a complex scaled-down roof component under different scenarios. A good agreement between the numerical and experimental data was achieved.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Automotive Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Agha, Akshat
Contributors dc:contributor
  • Fadi Abu-Farha, Committee Chair
  • Srikanth Pilla
  • Garrett Pataky
  • Gang Li
  • David Schmueser

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_dissertations/2466

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Agha, Akshat. Cure Dependent Viscoelastic-Plastic Modeling of Adhesives to Capture CTE Effects in Multi-Material Structures. Dissertation thesis, https://open.clemson.edu/all_dissertations/2466