Clemson University
Particle Migration in Non-Newtonian Fluid Flows Through Curved Microchannels
Abstract
dc:description.abstractInnovations in microfabrication over the past three decades have enabled the development of microfluidic devices with intricate channel geometry. Microfluidic platforms offer controlled manipulation of fluids and particles by leveraging the internally induced and/or externally imposed force field(s). The demand for compact microchannel geometry has turned the attention toward curved microchannels with significantly reduced footprints. However, most of the previous studies in curved microchannels have been limited to particle migration in Newtonian fluids. The influence of fluid rheology has remained largely unexplored. In the first part of this dissertation, we present a systematic experimental study on the influences of fluid inertia, elasticity and shear thinning on particle migration in pressure-driven flow of polymer solutions through curved microchannels. The typical flow-induced force dynamics is transformed due to the curvature-driven Dean vortices and fluid rheological effects, each of which can alter the particle equilibrium position(s). Specifically, in a spiral microchannel, particles equilibrate towards the outer half of the spiral in polymer-based non-Newtonian fluids, contrasting the inner half focusing in a Newtonian fluid. The introduction of fluid elasticity or shear thinning reduces the threshold Reynolds number required to achieve particle focusing. In a serpentine microchannel, particles migrate toward the center regardless of the fluid rheology due to the alternating curvature. Each of the fluid rheological effects alone is found to accelerate this centerline particle focusing while the combination of fluid elasticity and shear thinning may yield multiple equilibrium particle positions. In the second part of this dissertation, we study the particle migration in DC electric field-driven flow of polymer solutions through curved microchannels. The channel curvature induced non-uniform electric field creates a dielectrophoretic force, which couples with the fluid rheology-induced hydrodynamic force to affect the particle dynamics. In a serpentine microchannel, the alternating nature of the dielectrophoretic force yields a single-line particle stream at the center in a Newtonian fluid. Introducing elasticity lowers the threshold electric field required to achieve this centerline focusing. In contrast, particles in a shear-thinning fluid exhibit wall focusing, which gets defocused in a viscoelastic and shear thinning fluid. In a spiral microchannel, the unchanging direction of the dielectrophoretic force directs particles towards the outer wall in a Newtonian fluid. Introducing elasticity shifts the particle focusing position closer to the outer wall while at a lowered threshold electric field. In contrast, fluid shear thinning pushes particles toward either wall like in the serpentine microchannel.
Degree
thesis:*- Name thesis:degree_name
- Doctor of Philosophy (PhD)
- Level thesis:degree_level
- Dissertation
- Discipline thesis:degree_discipline
- Mechanical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Raut, Sanskruti Ramesh
- Contributors dc:contributor
-
- Dr. Xiangchun Xuan
- Dr. Rodrigo Martinez-Duarte
- Dr. Zhen Li
- Dr. Yuhao Xu
Subjects
dc:subject × 8Identifiers
dc:identifier.*- Repository record dc:identifier
- https://open.clemson.edu/all_dissertations/4125