Back to search

Clemson University

INFLUENCE OF TEMPERATURE AND POLYMER/ MOLD SURFACE INTERACTIONS ON MICRO-FEATURE REPLICATION AT AMBIENT PRESSURE IN MICRO INJECTION MOLDING

Abstract

dc:description.abstract

This study assesses micro-feature replication at elevated mold temperature and ambient pressure using a variety of polymers. Moldings were made on the surface of stainless steel and silicon wafers containing features as small as 130 nm under isothermal conditions in a heated chamber by allowing polymer to spread over the features at ambient pressure. Feature replication was analyzed via AFM and SEM. Polymer behavior was characterized via melt contact angle and melt viscosity. While feature detail was well replicated, the moldings exhibited poor dimensional accuracy due to shrinkage. In general, polymers with low viscosity and surface tension comparable to the mold material showed better feature replication.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Thakur, Varun
Contributors dc:contributor
  • Angstadt, David C

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/48

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Thakur, Varun. INFLUENCE OF TEMPERATURE AND POLYMER/ MOLD SURFACE INTERACTIONS ON MICRO-FEATURE REPLICATION AT AMBIENT PRESSURE IN MICRO INJECTION MOLDING. Thesis thesis, https://open.clemson.edu/all_theses/48