Back to search

Clemson University

MIXED CONVECTIVE HEAT TRANSFER AND EVAPORATION AT THE AIR-WATER INTERFACE

Abstract

dc:description.abstract

Functional forms for mixed convective heat transfer and evaporation from an air-water interface were obtained. To obtain these functions, heat transfer and evaporation rates from the air-water interface of an evaporating body of water were quantified in a wind/water tunnel in the presence of an oleyl alcohol monolayer on the water surface. The Nusselt (Nu) and Sherwood (Sh) numbers, parameterizing the dimensionless heat and mass transfer respectively, for transport from the water bulk to air were expressed as functions of the air side Rayleigh (Ra) and Reynolds (Re) numbers. The Nu and Sh were calculated for a range of Ra from 1.1*10^(7) to 4.1*10^(7) and a range of Re from 0 to 3.5*10^5. Power law Nu(Ra) and Nu(Re) relationships parameterizing natural and forced convective heat transfer respectively were then obtained as were Sh(Ra) and Sh(Re) relationships parameterizing natural and forced convective evaporation. Mixed convective Nu(Ra, Re) and Sh(Ra, Re) functions were formulated using a vectorial additive model having an exponent of four. These functions predicted the experimentally obtained Nu(Ra), Nu(Re), Sh(Ra) and Sh(Re) relationships with reasonable accuracy. From the Nu(Ra), Nu(Re), Sh(Ra) and Sh(Re) results as also from the results of the mixed convective equations, it was concluded that the mixed convective regime lay between 1 - 3 m/s i.e. (0.6*10^5) < Re < (2.1*10^5) for both heat and mass transfer. To obtain repeatable results and for these results to be applicable to field conditions, a monolayer of oleyl alcohol was applied to the water surface to maintain spatially and temporally consistent surface conditions. An IR camera was used to visualize the surface flow and to judge the homogeneity of the surfactant film. It was found that the oleyl alcohol monolayer applied to the water surface formed a homogenous surfactant film thus ensuring consistent conditions for all experiments.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gokhale, Prasad
Contributors dc:contributor
  • Saylor, John R
  • Figliola , Richard S
  • Beasley , Donald E

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/272

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Gokhale, Prasad. MIXED CONVECTIVE HEAT TRANSFER AND EVAPORATION AT THE AIR-WATER INTERFACE. Thesis thesis, https://open.clemson.edu/all_theses/272