Back to search

Clemson University

THE ELECTRICAL CHARACTERIZATION OF TANTALUM CAPACITORS AS MIS DEVICES

Abstract

dc:description.abstract

Electrical characteristics of a new class of tantalum capacitor are presented. Specifically, this type of tantalum capacitor is manufactured by KEMET Electronics Corporation and utilizes Poly(3,4-ethylenedioxythiolphene) (PEDOT) as the cathode material. There are two capacitor varieties based on the polymerization method used for the PEDOT. One uses In-Situ polymerization, and the other uses Pre-Polymerization. Existing polymer Ta capacitors use In-Situ polymerization while Pre-Polymerization is a new technique of cathode application. We investigated both types of devices to determine what, if any, performance benefits were gained by using Pre-Poly. In a basic form Ta capacitors consist of a Ta anode, Ta2O5 dielectric, and PEDOT cathode polymerized to be a semiconductor. Based on the simplified representation of the capacitor materials these devices were investigated as MIS structures and C-V, I-t, and I-V measurements were made. C-V measurements were used to observe characteristics of MIS operation in the devices. Measurements were made from room temperature down to 100K in attempts to suppress the leakage current in these devices. I-t and I-V measurements were used to identify dominating leakage current mechanisms. The Poole-Frenkel Effect, the Schottky Effect, and Space-Charge-Limited Current were observed in In-Situ polymerized devices, while the Poole-Frenkel Effect, the Schottky Effect, and Fowler-Nordheim Tunneling were observed in Pre-Poly devices. Overall, both devices showed voltage dependent capacitance. The Pre-Poly devices generally had lower levels of leakage current. However, due to differing properties of the polymer in each case In-Situ devices exhibited less capacitance loss at low temperatures.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Holman, Brian
Contributors dc:contributor
  • Harrell, William R
  • Harriss , James E
  • Wang , Pingshan

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/393

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Holman, Brian. THE ELECTRICAL CHARACTERIZATION OF TANTALUM CAPACITORS AS MIS DEVICES. Thesis thesis, https://open.clemson.edu/all_theses/393