Back to search

Clemson University

Monitoring CO Concentration in Fuel Cells Using Microcantilever Sensors

Abstract

dc:description.abstract

Estimating the concentration of gases including carbon monoxide (CO) in the hydrogen fuel exiting the reformer and entering the fuel cell is imperative. A high concentration of CO can cause fuel-cell catalyst poisoning, which permanently destroys the cell. Current practices call for utilizing expensive and bulky spectral analyzers to achieve this task. In addition to their high cost, these methodologies, undoubtedly, hinder the portability and self-containment of the cell. To overcome these problems and achieve the desired objectives of a portable, self-contained, and real-time measurement module, this thesis presents and experimentally investigates a new enabling technology based on utilizing an array of microcantilever sensors to detect minute concentrations of CO in the fuel cell. Results of this study indicate that microcantilevers can be spin coated with homogenous layers of copper-exchanged Y zeolite (CuY). This zeolite is capable of adsorbing CO over a range pressures and fuel cell operating temperatures. As a result of this adsorption, the sensor experiences a shift in its resonance frequency, which can be measured and related to the concentration of CO. It is determined that maximum adsorption capacity of the sensor occurs at 40 oC using CuY zeolite that is loaded with 10 wt% Cu. Furthermore, experimental findings indicate that the sensitivity of the sensor increases as the number of zeolite layers is increased up to a certain threshold (4 layers). Beyond this threshold, adding more layers will only result in a less sensitive sensor. In the experiments described in this thesis, a maximum repeatable shift of 275 Hz in the first modal frequency of the microcantilevers is measured. Ultimately, such frequency shifts can be iii related to the concentration of CO in the gas mixture, allowing closed-loop, real-time control and diagnosis of the flow of gases into and out of the fuel cell. This can help avoid fuel-cell starvation and prevent catastrophic deactivation of the necessary fuel cell catalyst.

Degree

thesis:*
Name thesis:degree_name
Master of Engineering (ME)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Demir, Tugba
Contributors dc:contributor
  • Daqaq, Mohammed F.
  • Bruce , David A.
  • Pisu , Pierluigi

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/740

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Demir, Tugba. Monitoring CO Concentration in Fuel Cells Using Microcantilever Sensors. Thesis thesis, https://open.clemson.edu/all_theses/740