Clemson University
DETERMINATION OF HIGHER ORDER COEFFICIENTS FOR A CRACK PARALLEL TO AN INTERFACE
Abstract
dc:description.abstractA general method based on the singular integral equations is developed to computationally determine the higher order coefficients in mixed mode fracture mechanics. These 'k' and 'T' coefficients are defined with respect to a polar coordinate system centered at a crack tip, and give asymptotic expressions for stresses and displacements according to the William's eigenfunction expansions, (r, ) (2r) k f (n, ) k f (n, ) IIk ij II n Ik ij I n n 0 2 1 n ij 1 (0, ) (2 ) ( , ) ( , ) , , ; , , I IT n I IT II IIT ij n ij n ij n T f r T f n T f n i r j r In the above expression the n = 0 terms correspond to the modes I and II stress intensity factors and the so called, T-stress. From a method point of view, the higher order k-coefficients are easily obtained, while the T-coefficients require significant postprocessing of the singular integral equation solution. A planar crack parallel to an interface between two elastic materials and subjected to far-field tension is considered as an example and extensive results are presented. This example is chosen due to the anomalous behavior of a closing crack tip as the crack approaches the interface for certain material combinations. Such 'Comninou contact zones' occur even in a tensile field when the crack is within a critical distance from the interface. Numerous results are provided that compare the asymptotic solutions with that of the full-field. It is shown that up to four k-coefficients and many T-coefficients can be determined for h/a = 0.001, where h is the distance of the crack from the interface and a is the half-crack length. While the application of the method to the case of a crack parallel and very close to an interface focuses on the anomaly of a closing crack tip, in general the ability to determine iii higher order coefficients can be used to quantify the size of the zone in which linear fracture mechanics is valid.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Mechanical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Kolluru, Venkata lakshman
- Contributors dc:contributor
-
- Joseph, Paul F
- Thompson , Lonny L
- Li , Gang
Subjects
dc:subject × 3Identifiers
dc:identifier.*- Repository record dc:identifier
- https://open.clemson.edu/all_theses/950