Abstract
dc:description.abstractHeat sealing is an integral method for the closure and protection of packaging. Previous work has shown that seal strength is developed by the interdiffusion of polymer chains within heat seals. Heat seals were made between two dissimilar materials. Poly(ethylene-co-acrylic acid) (EAA) was heat sealed to ionomer. Diffusion within the EAA-ionomer heat seals was estimated. The diffusion estimates were then related to resulting seal strength in the EAA-ionomer sealant system. Heated tooling sealing was utilized to make heat seals at 40 psi (275.79 kPa), 0.5 seconds, and a range of temperatures between 180˚F (82.22˚C) and 300˚F (148.89˚C). Scanning electron microscopy and energy dispersive x-ray spectroscopy was employed to measure the diffusion of polymer chains within the heat seals. Two estimators for polymer chain diffusion were made for each heat seal. The results of this study agree with previous theories and computations on heat sealing. Polymer chain diffusion was measured in two ways. It was found that heat energy drives polymer chain diffusion. Diffusion consistently increased as the heat seal temperature was increased. Greater polymer chain diffusion distances resulted in heat seals with greater seal strength.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Packaging Science
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Cooper, Russell
- Contributors dc:contributor
-
- Dr. Duncan Darby
- Dr. Robert Kimmel
- Dr. Patrick Gerard
Subjects
dc:subject × 9Identifiers
dc:identifier.*- Repository record dc:identifier
- https://open.clemson.edu/all_theses/2039