Back to search

Clemson University

Design Optimization of Tank Track Pad Meta-Material Using the Cell Synthesis Method

Abstract

dc:description.abstract

The elastomeric backer pad on the M1 Abrams tank track experiences highly cyclic and dynamic loads during normal operating conditions. As a result, extensive heat is generated within the pad due to its viscoelastic hysteretic nature which leads to its early failure. Research has been carried out in the past at Clemson University to design a meta-material that will mimic the deformation behavior of the elastomeric backer pad but will be made out of a linearly elastic constitutive material to eliminate hysteresis. A meta-material in this context is an artificial material in the form of a periodic structure that exhibits effective properties that differ from its constitutive material. Previous attempts to design a feasible meta-material as an effective replacement to the existing elastomeric backer pad have been unsuccessful. The work carried out in this research therefore, is focused on developing a meta-material that satisfies all the application specific requirements. The meta-material is designed based on the steps prescribed by the Unit Cell Synthesis Method which was developed in previous research. Using this method, a unit cell based periodic meta-material can be designed that exhibits nonlinear deformation behavior by implementing various combinations of different elemental geometries that show geometric nonlinearity under deformation. The idea is to attain a targeted nonlinear deformation response of the meta-material structure by tuning the geometric nonlinearities of one or multiple entities in order to replace the material nonlinearity of the target material. A modification is proposed to the original method to make it more efficient by introducing a multi-objective optimization step that considers all the relevant feasibility criteria concerning the meta-material design. Two unit cell based meta-material concepts are evaluated and a best meta-material design is chosen based on the results obtained from the multi-objective optimization problem. The optimized meta-material is then subjected to dynamic tank wheel roll-over conditions to compare its deformation response with that of the original pad. Finally, conclusions are drawn and scope for future work is discussed.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kulkarni, Neehar Milind
Contributors dc:contributor
  • Dr. Georges Fadel, Committee Chair
  • Dr. Nicole Coutris
  • Dr. Gang Li
  • Dr. Matthew Castanier (US Army – TARDEC)

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/2414

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kulkarni, Neehar Milind. Design Optimization of Tank Track Pad Meta-Material Using the Cell Synthesis Method. Thesis thesis, https://open.clemson.edu/all_theses/2414