Back to search

Clemson University

Continuum Surrogate Software Interface for Teleoperation of Continuum Robots

Abstract

dc:description.abstract

This thesis presents a novel teleoperation interface for continuum robots. Previous tele-operation interface methods for continuum robots did not include a natural mapping due to a degree-of-freedom mismatch, using non continuum input devices with fewer degrees-of-freedom than the robot that was being controlled. The approach introduced in this thesis involves creating a 3D model of the robot using graphics libraries and a continuum kinematic model, then manipulating that graphical 3D model on screen to directly control the continuum robot. This thesis details the development of both the model and software. The teleoperation interface was developed specifi-cally for a nine degree-of-freedom pneumatically-driven extensible continuum robot (OctArm), but it applies to any continuum robot with an arbitrary number of sections due to its modular design. Experiments using the aforementioned system on two different continuum robots are reported and areas for future work and improvement are detailed.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Scott, Ryan Matthew
Contributors dc:contributor
  • Dr. Ian Walker, Committee Chair
  • Dr. Apoorva Kapadia
  • Dr. Keith Green

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/2439

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Scott, Ryan Matthew. Continuum Surrogate Software Interface for Teleoperation of Continuum Robots. Thesis thesis, https://open.clemson.edu/all_theses/2439