Clemson University
The Effect of Carbon Black Electrocatalyst Type and Ink Composition on the Production of H<sub>2</sub>O<sub>2</sub> with Gas Diffusion Electrodes
Abstract
dc:description.abstractHydrogen peroxide (H2O2) is a powerful oxidizing agent that produces no known disinfection by products (DBPs), making it an ideal candidate for water treatment if produced efficiently. This study compared the efficiency of H2O2 electrosynthesis between different conductive carbon electrocatalysts, binding agents, and current densities, with phosphate buffered saline (PBS) as the electrolyte in a gas diffusion electrode (GDE). The results showed that for any given binding agent, the electrocatalyst that produced the most H2O2 changed based upon the current density applied to the cathodes. A current density dependent impact of Nafion as the binding agent on both Printex L6 and Vulcan XC 72 electrocatalysts was also observed, with Printex L6 performing best without Nafion used at all at 1mA/cm2 and 0.5 mA/cm2. The best performance for Vulcan XC 72 was achieved using 0.233 mg Nafion/mg C at 1mA/cm2 and 0.5 mA/cm2. Cathode performance was found to be independent of the cathode porosity, as the porosity of the different electrocatalysts were similar.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Environmental Engineering and Science
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Gex, Alexander
- Contributors dc:contributor
-
- Sudeep Popat
- David Ladner
- David Freedman
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://open.clemson.edu/all_theses/3597