Abstract
dc:description.abstractPolyether ether ketone (PEEK) is widely regarded as a high-performance thermoplastic material due to its desirable properties, including a high strength to weight ratio and excellent chemical stability. However, a practical challenge to working with PEEK is that its chemical resistance and inertness make the adhesion of functional coatings to PEEK surfaces quite difficult. To this end, we have developed a method for promoting adhesion between PEEK and a thermoset epoxy coating by introducing a reactive and mechanically robust polymer layer at the interface, which bonds with both the substrate and the coating. Our process involves pre-treatment of PEEK using mechanical abrasion and an environmentally friendly chemical etchant capable of increasing reactivity/polarity. This process introduces oxygen-containing functional groups at the surface that act as anchor points for the polymer interlayer. Polyglycidyl methacrylate (PGMA) and various PGMA-based copolymers were selected as interlayer materials due to their multiple epoxy functionality and are applied to the PEEK surface via dip coating. The interlayer swells and co-cures within the epoxy resin as it is used, forming strong bonds with both the substrate and the epoxy coating. The result is a significant increase in adhesive strength when compared to the untreated PEEK-epoxy interface.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- School of Materials Science and Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Rozelsky, Eric Charles
- Contributors dc:contributor
-
- Igor A. Luzinov
- Stephen H. Foulger
- Olin T. Mefford
- Dimitris Priftis
Subjects
dc:subject × 3Identifiers
dc:identifier.*- Repository record dc:identifier
- https://open.clemson.edu/all_theses/3616