Back to search

Clemson University

Modeling Hierarchical Porous Electrodes With Tailored Anisotropic Structure

Abstract

dc:description.abstract

Modern electric vehicles and consumer electronics applications demand high specific energy from Li-ion batteries, which can be charged and discharged faster. In the search for high specific energy, researchers have tried to make thicker battery electrodes which contain a greater proportion of active material. While chemical and structural modification of electrodes can help to increase the electronic conductivity of active material, the microstructure of porous electrodes can be engineered to enhance ion transport for fast charge and discharge. Previous research has shown that macropores introduced by directional freeze tape casting can enhance the performance of thick porous electrodes. For instance, Azami-Ghadkolai et al. have studied freeze tape cast molybdenum doped lithium titanate cathodes and demonstrated that macropores in an anisotropic hierarchical structure can mitigate the depletion of lithium salt at the current collector side of the electrode. Their study also highlighted the utility of numerical simulations of charge transport in porous electrodes. However, they only considered macrochannels of the same width as the active materialcolumns. The main research goal of this thesis is a numerical investigation of the impactof the channel width on rate capability and specific energy of hierarchical porouselectrodes. By leveraging the finite element software COMSOL, we developed three different models with channel widths equal to, half, and double the width of the cathode walls, respectively, while the total width of the cathode was kept constant. The numerical results indicate that the narrow channel model exhibits the best performance in terms of specific energy at high discharge rate amongst the three models. The thinness where there is equivalent mass loading makes the narrow channel model a promising microstructure that can be targeted in experimental electrode fabrication.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sarker, Debanjan
Contributors dc:contributor
  • Ulf D. Schiller
  • Rajendra K. Bordia
  • Jianhua Tong

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/3871

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sarker, Debanjan. Modeling Hierarchical Porous Electrodes With Tailored Anisotropic Structure. Thesis thesis, https://open.clemson.edu/all_theses/3871