Back to search

Clemson University

Impact of Nitrogen Species on Algal Carbon Capture

Abstract

dc:description.abstract

Increasing global carbon emissions from fossil fuel combustion and the resulting detrimental effects of climate change have created a need for atmospheric carbon drawdown. Biological-based carbon capture not only sequesters carbon dioxide (CO2) but also provides a sustainable source of biomass for biofuels and biomaterials. Thus, the aim of this research was to examine freshwater green algal growth with total ammoniacal nitrogen (TAN) and nitrate nitrogen (NO3-N) sources at high pH for improving carbon capture potential. The following objectives were accomplished: nitrogen uptake was identified as simultaneous or sequential, the effect of TAN and NO3-N on culture pH was quantified, and kinetic and stoichiometric growth parameters were examined for the two nitrogen sources. The literature review discusses the impact of TAN and NO3-N on algal growth and culture pH, in which autotrophic algal growth using TAN lowers culture pH by producing H+ ions, and NO3-N raises pH by consuming H+. The Monod model kinetic constants from microalgal growth studies are summarized for each nitrogen source, and inhibitory levels of TAN are compiled. The properties of carbonate equilibrium reactions with passive CO­2 diffusion, enhanced CO2 diffusion in alkaline systems, and subsequent inorganic carbon-limited algal growth are presented to justify a high culture pH design. Scenedesmus sp. growth was observed in open reactors with various TAN and NO3-N treatment ratios. Specific growth rates were analyzed based on three identified phases of growth based on nitrogen and carbon substrate utilization. The highest specific growth rates were observed during phase one with TAN utilization and peak observed carbon, with an average of 0.043 hr-1 that was not impacted by initial TAN. Biomass yields on a nitrogen basis were assessed based on periods of TAN or NO3-N use. In reactors containing both nitrogen sources, TAN was utilized preferentially by the algae with NO3-N utilization after TAN depletion. The culture pH was stable during TAN consumption and rose once NO3-N was used; the peak pH for the largest TAN:NO3-N ratio was 10.990, while the peak pH for the NO3-N only treatment was 11.319. The results of this study can aid the design of algal cultivation systems for carbon capture, specifically the application of NO3-N and TAN as a biological pH control method to optimize both carbon capture and algal growth.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Biosystems Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Todd, Lauren J
Contributors dc:contributor
  • Caye Drapcho
  • Mary Katherine Watson
  • Yu-Bo Wang
  • Tom Owino

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://open.clemson.edu/all_theses/4379

Chain of custody

source
Harvested from
Clemson University
Base URL
open.clemson.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Todd, Lauren J. Impact of Nitrogen Species on Algal Carbon Capture. Thesis thesis, https://open.clemson.edu/all_theses/4379