Abstract
dc:description.abstractThis work successfully demonstrates solvent extraction methods for separation of oil from the by-products when two commercially available vacuum pump oils were exposed to an intense neutron and gamma-ray radiation environment. Nuclear fusion power at a commercial scale has accelerated the need for radiation resistant vacuum technology, such as oil-based diffusion pumps. Polyphenyl ether and aromatic silicone oils were irradiated at the Rhode Island Nuclear Science Center (RINSC) up to MGy absorbed doses with neutron and gamma-ray radiation. Solvent extractions were performed using hexane and isopropanol to characterize the oil extraction as a function of total absorbed dose. The by-products of irradiation, herein referred to as residue, tended to be less soluble in the solvent thus allowing for separation from the bulk oil. The polyphenyl ether oil outperformed the siloxane oil with greater than 60% of material extracted after receiving mixed gamma-neutron absorbed doses exceeding 6 MGy. The specific activity of the neutron irradiated oils was measured using liquid scintillation counting for comparison of radiation damage and to quantify the separation of radioactive material in the extraction process solutions. Isotope exchange of tritium onto the irradiated oils were also conducted, where oils display greater than 10x tritium exchange after irradiation; preferentially to the more radioactive, insoluble fraction
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Environmental Engineering and Earth Science
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Tillman, Cooper L
- Contributors dc:contributor
-
- Timothy DeVol
- Nicole Martinez
- Kori McDonald
Subjects
dc:subject × 8Identifiers
dc:identifier.*- Repository record dc:identifier
- https://open.clemson.edu/all_theses/4381