Clemson University
Development of Low-Cost Triaxial Force Sensor for Measurement of Human-Exoskeleton Interaction Forces
Abstract
dc:description.abstractContemporary research suggests that shear force is a major contributor to discomfort and pressure injury. However, the variation of shear forces during human-exoskeleton interaction dynamics is a highly unexplored field. The high cost of commercial triaxial force sensors may be a major factor in the notable lack of research in this field. Therefore, in this paper, we present a low-cost, 3D-printed triaxial force sensor designed specifically to measure the triaxial interaction forces between an exoskeleton and its user. The triaxial force sensor uses Carbon-Black/Silicone Rubber (CB/SR) strings to measure shear forces, whereas the normal force is measured with a Force Sensitive Resistor (FSR). The sensor is calibrated using a simple position-servo-based mechanism, and its response is characterized using the Static Decoupling Model. The sensor is validated using a setup in which known weights pull each axis through a pulley. The Normalised Mean Absolute Error of the sensor ranges from 7.45% to 19.65%, indicating that the sensor is substantially accurate. Also, the sensor achieves the target shear force sensitive range of 1.22 - 9.14 N in many of the tested directions and exceeds the minimum required range of 1.22 - 3.046 N for measuring discomfort. Human Trials were also performed, in which the sensor response was tested across six able-bodied subjects performing activities such as walking, lunges, squats, sit-to-stand, and stair climb. The results from the human trials indicate good sensor response within the force ranges observed in previous research across almost all activities. The sensor is 84% cheaper than commercial alternatives but offers comparatively lower performance in terms of non-linearity, hysteresis, and repeatability. Therefore, the sensor has strong potential as a low-cost triaxial force sensor for measuring variations in triaxial forces during Human-Exoskeleton Dynamics.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Mechanical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Sarvathullah, Hamdan Khan
- Contributors dc:contributor
-
- Dr. Ge Lv
- Dr. Gregory Mocko
- Dr. Divya Srinivasan
Subjects
dc:subject × 13- Wearable Robotics
- Triaxial Force and Tactile Sensing
- Prosthetics and Exoskeletons
- Carbon Black/Silicone Rubber
- Force Sensing Resistor
- Interaction Forces
- Acoustics, Dynamics, and Controls
- Biomechanical Engineering
- Biomedical Devices and Instrumentation
- Controls and Control Theory
- Electro-Mechanical Systems
- Orthotics and Prosthetics
- Sports Sciences
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://open.clemson.edu/all_theses/4788