Back to search

Cornell University

SOLID PHASE EPITAXY IN AMORPHOUS SILICON: KINETICS ON MILLISECOND TIMESCALE AND USE AS TEMPERATURE CALIBRATION FOR LSA

Abstract

dc:description.abstract

SOLID PHASE EPITAXY IN AMORPHOUS SILICON: KINETICS ON MILLISECOND TIMESCALE AND USE AS TEMPERATURE CALIBRATION FOR LSA Min Wu Abstract The kinetics and mechanism for solid phase epitaxy (SPE) in has been widely studied due to its critical use in the semiconductor industry. Extensive studies have established the kinetics of this transformation over a wide range of temperatures and time scales; however, careful exploration of the behavior under millisecond thermal annealing is limited. As laser spike annealing is now a widely adopted processing tool for semiconductor manufacturing, comparison and understanding of the kinetics in this time regime is critical. In this work, the lateral-gradient laser spike annealing method was used to investigate the solid phase epitaxy of amorphous silicon over dwell times from 250 ms to 10 ms using CO2 laser irradiation. Silicon samples, amorphized by Si self-implantation, were annealed under varying dwell times and peak temperatures. Transformations from amorphous to crystalline Si, and ultimately melt, were observed using white light and narrow band LED microscope imaging. The width of fully crystallized zone, and the width of the melted area were recorded to determine threshold laser powers for the onset of full crystallization and melting. Partially crystallized areas (partial SPE) was observed at the boundary of the fully crystallized zone; to understand the SPE kinetics in this region, visible light spectroscopy was used to measure the reflectance as a function of wavelength to quantify the degree of SPE growth. These rates are compared with previous estimates using estimated peak temperatures from earlier calibrations of the LSA system. SPE rates are exponentially dependent on temperature and thus also provide a means of calibrating the temperature reached during LSA as a function of the laser power. Based on measured and estimated SPE rates in the LSA timescale, the peak temperature as a function of laser power was estimated for the current LSA configuration. Results of this calibration are compared with earlier temperature calibrations.

Degree

thesis:*
Name thesis:degree_name
M.S., Materials Science and Engineering
Level thesis:degree_level
Master of Science
Discipline thesis:degree_discipline
Materials Science and Engineering
Grantor
Cornell University
Year dc:date.issued
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wu, Min
Chair dc:contributor.chair
  • Thompson, Mike
Committee member dc:contributor.committeemember
  • van Dover, R. B.

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Bibid
13277847
Dc Identifier Other
ProQuest Submission ID: 11040
ProQuest Publication ID: 28089038

Chain of custody

source
Harvested from
Cornell University
Base URL
ecommons.cornell.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Wu, Min. SOLID PHASE EPITAXY IN AMORPHOUS SILICON: KINETICS ON MILLISECOND TIMESCALE AND USE AS TEMPERATURE CALIBRATION FOR LSA. Master of Science thesis, Cornell University, 2020. https://hdl.handle.net/1813/103141