Back to search

Cornell University

DESIGNING POROUS STRUCTURES FOR ORTHOPEDIC APPLICATIONS USING METAL ADDITIVE MANUFACTURING

Abstract

dc:description.abstract

Stress shielding, caused by the mismatch in stiffness between conventional solid metallic implants and human bone, can result in bone resorption and implant loosening, leading to revision surgeries. One potential solution to address this issue is the use of porous structures, which can reduce the stiffness mismatch between the implant and surrounding bone. However, such structures also present a challenge in terms of reduced fatigue strength. To investigate this issue, we conducted finite element simulations and experimental tests to examine the influence of unit cell geometry on the elastic modulus and fatigue life of Ti-6Al-4V lattice structures printed via Electron Beam Melting (EBM). We analyzed four different lattices, including two topology-optimized structures, Design 1, and Design 2 and two conventionally used Cube and Octahedron unit cells. Based on our failure analysis, we found that fatigue fracture predominantly occurred at nodal connectivity points due to stress concentration and was relatively insensitive to manufacturing defects. Fatigue life being a critical aspect of Implant design, this work also explored methods to improve the fatigue life of lattice structures. Both Design 1 and Octahedron lattices were subjected to Hot Isostatic Pressing (HIP). While HIP was effective in closing internal voids associated with EBM, the process resulted in a reduction in yield strength. Consequently, the absolute fatigue strength under the same load amplitude did not improve with HIP. However, the normalized fatigue strength of Design 1 and Octahedron increased from 0.4σy to 0.49 σy and 0.4σy to 0.52σy respectively .

Degree

thesis:*
Name thesis:degree_name
M.S., Mechanical Engineering
Level thesis:degree_level
Master of Science
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
Cornell University
Year dc:date.issued
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Krishna Pillai, Ajay Pillai
Chair dc:contributor.chair
  • Moridi, Atieh
Committee member dc:contributor.committeemember
  • Zehnder, Alan

Subjects

dc:subject × 6

Rights

dc:rights
Statement dc:rights
  • Attribution 4.0 International
Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Bibid
16219343
Dc Identifier Other
ProQuest Submission ID: 11947
ProQuest Publication ID: 30631474

Chain of custody

source
Harvested from
Cornell University
Base URL
ecommons.cornell.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Krishna Pillai, Ajay Pillai. DESIGNING POROUS STRUCTURES FOR ORTHOPEDIC APPLICATIONS USING METAL ADDITIVE MANUFACTURING. Master of Science thesis, Cornell University, 2023. https://hdl.handle.net/1813/114515